Crossover Components
Mundorf L100-0.10 | 0.10 mH | 0.14 Ω | 2% | 18 AWG | Air-core Coil
Dayton Audio LW18-50 | 0.50 mH | 0.33 Ω | 3% | 18 AWG | Air-core Coil
Intertechnik LU32/015/071 | 0.15 mH | 0.32 Ω | 3% | 21 AWG
Mundorf L71-0,10 | 0.10 mH | 0.23 Ω | 2% | 21 AWG | MCoil AirCore Coil
Intertechnik TRI92/1.8/0.50 | 1.8 mH | 0.494 Ω | 1% | 24 AWG
Amplimo 78616 300 VA | 2 x 25 V Toroidal Transformer
TRI/DR56/8.2 | 8.2 mH | 0.39 Ω | 3% | 24 AWG | Tritec Coil
Jantzen Audio 000-6440 | 8.2 mH | 0.10 Ω | 5% | 13 AWG | C-Coil Toroidal Coil
Jantzen Audio 000-8075 | 0.75 mH | 0.16 Ω | 2% | 12 AWG | Impregnated Copper Foil Coil
Jantzen Audio 000-8080 | 0.80 mH | 0.17 Ω | 2% | 12 AWG | Impregnated Copper Foil Coil
Intertechnik LU92/1.5/200 | 1.5 mH | 0.21 Ω | 3% | 12 AWG
Jantzen Audio 000-2335 | 0.27 mH | 0.08 Ω | 3% | 17 AWG | I Iron-core Coil
Jantzen Audio 000-2326 | 1.8 mH | 0.60 Ω | 3% | 21 AWG | I Iron-core Coil
Audyn CO92/4.7/140 | 4.7 mH | 0.52 Ω | 5% | 15 AWG | Corobar Coil
FOIL0.82 | 0.82 mH | 0.22 Ω | 2% | 14 AWG | Copper Foil Inductor
Jantzen Audio 000-2255 | 5.6 mH | 1.94 Ω | 3% | 24 AWG | I Iron-core Coil
Jantzen Audio 000-2254 | 6.8 mH | 2.29 Ω | 3% | 24 AWG | I Iron-core Coil
Mundorf LL45-1,2 | 1.2 mH | 0.46 Ω | 2% | 17 AWG | MCoil AirCore Hepta Strand Coil
Jantzen Audio 000-2184 | 0.60 mH | 0.18 Ω | 3% | 18 AWG | I Iron-core Coil
Jantzen Audio 000-2175 | 0.47 mH | 0.126 Ω | 3% | 18 AWG | I Iron-core Coil
Jantzen Audio 000-2151 | 1.0 mH | 0.26 Ω | 3% | 18 AWG | I Iron-core Coil
Jantzen Audio 000-2079 | 1.1 mH | 0.37 Ω | 3% | 20 AWG | I Iron-core Coil
Jantzen Audio 000-2011 | 1.5 mH | 0.46 Ω | 3% | 20 AWG | I Iron-core Coil
Jantzen Audio 000-2004 | 0.90 mH | 0.33 Ω | 3% | 20 AWG | I Iron-core Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























