Crossover Components
Dayton Audio LW18-15 | 0.15 mH | 0.18 Ω | 5% | 18 AWG | Air-core Coil
Amplimo 40PP6K5H Output Transformer Push-Pull 50 Watt
Amplimo 55PP4K5H Output Transformer Push-Pull 25 Watt
Jantzen Audio 000-1636 | 0.47 mH | 1.35 Ω | 3% | 26 AWG | Air-core Coil
Jantzen Audio 000-1475 | 0.18 mH | 1.20 Ω | 3% | 29 AWG | Air-core Coil
Dayton Audio AC20-50 | 0.50 mH | 0.49 Ω | 5% | 20 AWG | Air-core Coil
Dayton Audio AC20-45 | 0.45 mH | 0.45 Ω | 5% | 20 AWG | Air-core Coil
Amplimo 08SE5K0H Output Transformer Single-Ended 8 Watt
Amplimo 100PP2K5H Output Transformer Push-Pull 100 Watt
Intertechnik LU120/100/20 | 10 mH | 0.69 Ω | 3% | 12 AWG
Intertechnik FOIL3.90 | 3.9 mH | 0.41 Ω | 2% | 12 AWG | Copper Foil Inductor
Jantzen Audio 000-1322 | 0.27 mH | 0.71 Ω | 3% | 24 AWG | Air-core Coil
Jantzen Audio 000-1321 | 0.33 mH | 0.79 Ω | 3% | 24 AWG | Air-core Coil
Jantzen Audio 000-1102 | 0.24 mH | 0.64 Ω | 3% | 24 AWG | Air-core Coil
Jantzen Audio 000-1073 | 0.20 mH | 0.60 Ω | 3% | 24 AWG | Air-core Coil
Jantzen Audio 000-1003 | 0.12 mH | 0.32 Ω | 3% | 22 AWG | Air-core Coil
Jantzen Audio 000-0918 | 0.05 mH | 0.12 Ω | 1% | 20 AWG | Air-core Coil
Dayton Audio AC20-40 | 0.40 mH | 0.41 Ω | 5% | 20 AWG | Air-core Coil
Amplimo 65PP20KG Output Transformer Push-Pull 65 Watt
Intertechnik FOIL4.70 | 4.7 mH | 0.45 Ω | 2% | 12 AWG | Copper Foil Inductor
Dayton Audio LW18-13 | 0.13 mH | 0.16 Ω | 5% | 18 AWG | Air-core Coil
Dayton Audio LW18-10 | 0.10 mH | 0.14 Ω | 5% | 18 AWG | Air-core Coil
Dayton Audio AC20-25 | 0.25 mH | 0.35 Ω | 5% | 20 AWG | Air-core Coil
Dayton Audio AC20-20 | 0.20 mH | 0.29 Ω | 5% | 20 AWG | Air-core Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























