Crossover Components
SETA RWS 845 / RB 58 / RW 68 - 120 Resistor, 16 W | 12 Ω
SETA RWS 845 / RB 58 / RW 68 - 18 Resistor, 16 W | 1.8 Ω
Mundorf MCAP400-6.80 | 6.80 µF | 3% | 400 V | Mcap Classic Capacitor
Mundorf SEO-1.5 Film Capacitor, 1.5 µF | 1 V | ±2%
Mundorf BH100-5.6 Iron Core Coil, 5.6 mH | DCR 0.39 Ω | ±3%
Mundorf H125-2.2 Iron Core Coil, 2.2 mH | DCR 0.17 Ω | ±3%
Mundorf BH71-22 Iron Core Coil, 22 mH | DCR 1.49 Ω | ±3%
Mundorf BH125-1.8 Iron Core Coil, 1.8 mH | DCR 0.14 Ω | ±3%
Mundorf MESGO-1.0T3.450 | 1 µF | 3% | 450 V | MCap EVO SilverGold Oil Capacitor
Mundorf SUP-SO-0.1 Film Capacitor, 0.1 µF | 1 V | ±5%
Visaton FC 3.9 MH FERRIT 40 MM Iron Core Coil, 3.9 mH
SETA RWS 864 / RWS 1064 - 3900 Resistor, 25 W | 3900 Ω
SETA RWS 864 / RWS 1064 - 3300 Resistor, 25 W | 3300 Ω
SETA RWS 864 / RWS 1064 - 56 Resistor, 25 W | 5.6 Ω
Mundorf BH125-2.7 Iron Core Coil, 2.7 mH | DCR 0.19 Ω | ±3%
Mundorf BH100-6.8 Iron Core Coil, 6.8 mH | DCR 0.46 Ω | ±3%
Mundorf CFC18-0.47 Copper Foil Coil, 0.47 mH | DCR 0.31 Ω | ±2%
Mundorf VLCU18-0.15 Copper Foil Coil, 0.15 mH | DCR 0.16 Ω | ±2%
Mundorf BH71-27 Iron Core Coil, 27 mH | DCR 1.68 Ω | ±3%
SETA RWS 864 / RWS 1064 - 18 Resistor, 25 W | 1.8 Ω
Mundorf MCAP630-4.70 | 4.70 µF | 3% | 630 V | Mcap Classic Capacitor
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























