Crossover Components
Mundorf L140-10 Air Core Coil | 10 mH | DCR 1.19 Ω | ±2%
Mundorf CFC18-3.3 Copper Foil Coil, 3.3 mH | ±2%
Mundorf VLCU18-1.8 Copper Foil Coil, 1.8 mH | DCR 0.7 Ω | ±2%
Mundorf LH45-4.7 Litz Wax Coil, 4.7 mH | DCR 0.34 Ω | ±3%
Mundorf BL180-0.82 Air Core Coil, 0.82 mH | DCR 0.17 Ω
Mundorf VLCU12-0.15 Copper Foil Coil, 0.15 mH | DCR 0.07 Ω
Mundorf VSCU15-1 Copper Foil Coil, 1 mH | DCR 0.1 Ω | ±3%
Mundorf L140-3.3 Air Core Coil, 3.3 mH | DCR 0.58 Ω | ±2%
Mundorf L50-2.7 Air Core Coil, 2.7 mH | DCR 2.81 Ω
Mundorf L125-5.6 Air Core Coil, 5.6 mH | DCR 0.95 Ω
Mundorf L125-0.1 Air Core Coil, 0.1 mH | DCR 0.09 Ω
Mundorf VSCU15-1.2 Copper Foil Coil, 1.2 mH | DCR 0.12 Ω | ±3%
Visaton KN 4.7 MH- 0.5 MM Iron Core Coil, 4.7 mH
Mundorf BL100-12 Air Core Coil, 12 mH | DCR 2.14 Ω
Mundorf CFC12-0.27 Copper Foil Coil, 0.27 mH | DCR 0.09 Ω
Mundorf VLCU18-2.2 Copper Foil Coil, 2.2 mH | DCR 0.8 Ω
Mundorf VLCU15-0.68 Copper Foil Coil, 0.68 mH | DCR 0.24 Ω | ±2%
Mundorf VLCU12-0.18 Copper Foil Coil, 0.18 mH | DCR 0.08 Ω
Mundorf L140-12 Air Core Coil | 1.2 mH | DCR 1.35 Ω
Mundorf CFC18-3.9 Copper Foil Coil, 3.9 mH | DCR 1.1 Ω | ±2%
Mundorf BL180-1 Air Core Coil, 1 mH | DCR 0.2 Ω | ±2%
Mundorf VSCU15-1.5 Copper Foil Coil, 1.5 mH | DCR 0.14 Ω | ±3%
Mundorf LL45-3 Air Core Coil, 3 mH | DCR 0.81 Ω | ±2%
Visaton KN 3.3 MH- 0.6 MM Iron Core Coil, 3.3 mH
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























