Crossover Components
Intertechnik LU32/26-AG/0.18 | 0.18 mH | 0.28 Ω | 3% | 20 AWG | True Silver Coil
Intertechnik AT62/100/132 | 1.0 mH | 0.34 Ω | 3% | 16 AWG
Intertechnik DR56/1.0/140 | 1.0 mH | 0.10 Ω | 5% | 15 AWG
Intertechnik DR56/1.2/140 | 1.2 mH | 0.12 Ω | 5% | 15 AWG
Intertechnik DR56/150/085 | 15 mH | 0.95 Ω | 5% | 20 AWG
Intertechnik HQ58/4.7/140 | 4.7 mH | 0.19 Ω | 5% | 15 AWG
Intertechnik P62/10.0/112 | 10 mH | 0.73 Ω | 5% | 17 AWG | Choke Coil
Intertechnik LU32/26-AG/0.15 | 0.15 mH | 0.26 Ω | 3% | 20 AWG | True Silver Coil
Intertechnik DR56/2.7/140 | 2.7 mH | 0.18 Ω | 5% | 15 AWG
Intertechnik HQ58/10/118 | 10 mH | 0.40 Ω | 5% | 17 AWG
Intertechnik P62/4.70/140 | 4.7 mH | 0.32 Ω | 5% | 15 AWG | Choke Coil
Intertechnik TRI62/039/0.50 | 0.39 mH | 0.209 Ω | 1% | 24 AWG
Intertechnik AT62/120/132 | 1.2 mH | 0.38 Ω | 3% | 16 AWG
Intertechnik DR56/1.8/140 | 1.8 mH | 0.138 Ω | 5% | 15 AWG
Intertechnik DR56/2.2/140 | 2.2 mH | 0.16 Ω | 5% | 15 AWG
Intertechnik DR56/3.0/140 | 3.0 mH | 0.20 Ω | 5% | 15 AWG
Intertechnik DR56/3.3/132 | 3.3 mH | 0.22 Ω | 5% | 16 AWG
Audyn CO62/2.4/140 | 2.4 mH | 0.33 Ω | 5% | 15 AWG | Corobar Coil
Intertechnik I78/270/085 | 2.7 mH | 0.41 Ω | 5% | 20 AWG | I-Point Coil
Intertechnik P62/22.00/095 | 22 mH | 1.55 Ω | 5% | 19 AWG | Choke Coil
Intertechnik LU25/012/060 | 0.12 mH | 0.32 Ω | 3% | 23 AWG
Intertechnik Air-core Coil – 0.03 mH | LU25 | DCR 0.20 Ω | Cu 0.50 mm | ±5.0%
Intertechnik LU55/5.60/071 | 5.6 mH | 2.47 Ω | 3% | 21 AWG
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























