Crossover Components
Jantzen Audio 000-5007 | 10 mH | 0.64 Ω | 3% | 18 AWG | Iron Core Coil With Discs
Jantzen Audio 000-2419 | 1.8 mH | 0.14 Ω | 3% | 14 AWG | Iron Core Coil
Jantzen Audio 000-0140 | 0.37 mH | 0.11 Ω | 3% | 13 AWG | Air Core Coil
Jantzen Audio 000-5155 | 8.2 mH | 0.39 Ω | 3% | 17 AWG | H Iron-core Coil
Jantzen Audio 000-0338 | 0.36 mH | 0.11 Ω | 3% | 13 AWG | Air Core Coil
Jantzen Audio 000-5160 | 18 mH | 0.87 Ω | 3% | 18 AWG | H Iron-core Coil
Jantzen Audio 000-1111 | 1.8 mH | 0.51 Ω | 3% | 17 AWG | Air Core Coil
Jantzen Audio 000-5427 | 2.7 mH | 0.13 Ω | 3% | 14 AWG | H Iron-core Coil
Jantzen Audio 000-1424 | 1.75 mH | 0.55 Ω | 3% | 17 AWG | Air Core Coil
Jantzen Audio 000-5802 | 1.5 mH | 0.086 Ω | 3% | 13 AWG | H Iron-core Coil
Jantzen Audio 000-1271 | 8 mH | 2.53 Ω | 3% | 20 AWG | Air Core Coil
Jantzen Audio 000-L-0056 | 0.56 mH | 0.24 Ω | 3% | 15 AWG | Litz Wax Coil
Jantzen Audio 000-826233 | 0.03 mH | 0.04 Ω | 2% | 14 AWG | Wax Coil
Jantzen Audio 000-0979 | 39 mH | 24.76 Ω | 3% | 26 AWG | Air Core Coil
Jantzen Audio 000-826232 | 0.02 mH | 0.03 Ω | 2% | 14 AWG | Wax Coil
Jantzen Audio 000-0795 | 1.25 mH | 0.34 Ω | 3% | 15 AWG | Air Core Coil
Jantzen Audio 000-826231 | 0.01 mH | 0.02 Ω | 2% | 14 AWG | Wax Coil
Jantzen Audio 000-1341 | 1.45 mH | 0.37 Ω | 3% | 15 AWG | Air Core Coil
Jantzen Audio 000-5650 | 0.82 mH | 0.05 Ω | 3% | 13 AWG | Iron Core Coil With Discs
Jantzen Audio 000-0056 | 0.77 mH | 0.21 Ω | 3% | 14 AWG | Air Core Coil
Jantzen Audio 000-5109 | 9.5 mH | 0.56 Ω | 3% | 18 AWG | Iron Core Coil With Discs
Jantzen Audio 000-5541 | 9.3 mH | 0.56 Ω | 3% | 18 AWG | Iron Core Coil With Discs
Jantzen Audio 000-5516 | 20 mH | 1.49 Ω | 3% | 20 AWG | Iron Core Coil With Discs
Jantzen Audio 000-5555 | 35 mH | 1.76 Ω | 3% | 20 AWG | Iron Core Coil With Discs
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























