Crossover Components
Audyn KPSN/022/250 | 0.22 µF | 2% | 250 V
Mundorf MR5-27 | 27 Ω | 5 W | 2% | Mresist MOX Metal-oxide Resistor
Mundorf MR5-2.70 | 2.70 Ω | 5 W | 2% | Mresist MOX Metal-oxide Resistor
Mundorf CFC16-0.12 | 0.12 mH | 0.11 Ω | 2% | 16.5 AWG | Foil Coil
Intertechnik HQ43/4.7/095 | 4.7 mH | 0.46 Ω | 5% | 19 AWG
Mundorf MR5-33 | 33 Ω | 5 W | 2% | Mresist MOX Metal-oxide Resistor
Mundorf MR5-3.30 | 3.30 Ω | 5 W | 2% | Mresist MOX Metal-oxide Resistor
Dynavox 2-Way Crossover | 4500 Hz | 8 Ohm
Intertechnik LUT55/1.0/10 | 1.0 mH | 0.61 Ω | 3% | 18 AWG
Jantzen Audio 001-0614 | 0.33 µF | 2% | 1200 V | Silver Z-Cap Capacitor
Audio Note CAP-100-STDR-68U-350V | 68 µF | 20% | 350 V
Mundorf MR5-39 | 39 Ω | 5 W | 2% | Mresist MOX Metal-oxide Resistor
Mundorf MR5-3.90 | 3.90 Ω | 5 W | 2% | Mresist MOX Metal-oxide Resistor
Dayton Audio High Pass Speaker Crossover 12 dB/Octave, 8 Ohm, 2000 Hz Assembled crossover
Dayton Audio High Pass Speaker Crossover 12 dB/Octave, 8 Ohm, 2500 Hz Assembled crossover
Mundorf BH100-1.8 Iron Core Coil, 1.8 mH | ±3%
Mundorf BL71-3.3 Air Core Coil, 3.3 mH | DCR 1.76 Ω | ±2%
Jantzen Audio 001-0618 | 0.47 µF | 2% | 800 V | Silver Z-Cap Capacitor
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























