Crossover Components
Mundorf MLGO450-330 | 330 µF | 20% | 450 V | MLytic HV Power Capacitor
Intertechnik MOX10/8.2 | 8.20 Ω | 10 W | 2%
Intertechnik LU44/056/100 | 0.56 mH | 0.42 Ω | 3% | 18 AWG
Audyn PLUS/0.47/08 | 0.47 µF | 2% | 800 V
Audio Note CAP-100-R-470U-63V | 470 µF | 20% | 63 V
Mundorf MR10-10 | 10 Ω | 10 W | 2% | Mresist MOX Metal-oxide Resistor
Mundorf MR10-1.00 | 1.00 Ω | 10 W | 2% | Mresist MOX Metal-oxide Resistor
Audio Note CAP-100-R-10U-500V | 10 µF | 20% | 500 V
Audyn ERA/330/63/1 | 330 µF | 10% | 63 V | Bipolar Electrolytic Capacitor
Audio Note CAP-5075 | 0.082 µF | 10% | 630 V
Mundorf MR10-12 | 12 Ω | 10 W | 2% | Mresist MOX Metal-oxide Resistor
Mundorf MR10-1.20 | 1.20 Ω | 10 W | 2% | Mresist MOX Metal-oxide Resistor
Audio Note CAP-5080 | 0.11 µF | 10% | 630 V
Audio Note CAP-5120 | 0.15 µF | 10% | 630 V
Mundorf MR10-15 | 15 Ω | 10 W | 2% | Mresist MOX Metal-oxide Resistor
Jantzen Audio 002-0982 | 56 Ω | 20 W | 5% | Ceramic Resistor
Jantzen Audio 000-0012 | 0.62 mH | 0.189 Ω | 3% | 14 AWG | Air-core Coil
Audio Note CAP-5130 | 0.18 µF | 10% | 630 V
Mundorf MR10-1.50 | 1.50 Ω | 10 W | 2% | Mresist MOX Metal-oxide Resistor
Mundorf MR10-18 | 18 Ω | 10 W | 2% | Mresist MOX Metal-oxide Resistor
Jantzen Audio 000-1892 | 5.0 mH | 1.30 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1899 | 1.2 mH | 0.33 Ω | 3% | 15 AWG | Air-core Coil
Audyn KPQS/5.6/630 | 5.6 µF | 5% | 630 V | QS6 Capacitor
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























