Crossover Components
Jantzen Audio 001-6186 | 300 µF | 5% | 100 V | EleCap Capacitor
Audio Note CAP-100-STDR-220U-500V | 220 µF | 20% | 500 V
Audio Note CAP-100-R-680U-63V | 680 µF | 20% | 63 V
Audio Note CAP-5150 | 0.22 µF | 10% | 630 V
Audio Note CAP-5160 | 0.33 µF | 10% | 630 V
Audyn KPQS/3.3/630 | 3.3 µF | 5% | 630 V | QS6 Capacitor
Audio Note CAP-5180 | 0.39 µF | 10% | 630 V
Intertechnik CO30/015/090 | 0.15 mH | 0.12 Ω | 5% | 19 AWG
Dayton Audio IC185 | 5.0 mH | 0.49 Ω | 3% | 18 AWG | Iron-core Coil
Jantzen Audio 000-0013 | 0.68 mH | 0.20 Ω | 3% | 14 AWG | Air-core Coil
Dayton Audio IC184-5 | 4.5 mH | 0.46 Ω | 3% | 18 AWG | Iron-core Coil
Intertechnik LUT44/056/10 | 0.56 mH | 0.44 Ω | 3% | 18 AWG
Audyn PLUS/0.10/12 | 0.10 µF | 2% | 1200 V
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























