Crossover Components
Jantzen Audio 002-0634 | 12 Ω | 5 W | 5% | Ceramic Resistor
Audyn KPQS/1.0/400 | 1.0 µF | 5% | 400 V | QS4 Capacitor
Audyn KPQS/082/630 | 0.82 µF | 5% | 630 V | QS6 Capacitor
Mundorf MLGO+25-47000 | 47000 µF | 20% | 25 V
Audio Note RES-NM35-1W-180K | 180 kΩ | 1 W | 1%
Jantzen Audio 002-0631 | 10 Ω | 5 W | 5% | Ceramic Resistor
Audio Note RES-NM35-1W-220K | 220 kΩ | 1 W | 1%
Mundorf MLGO+63-22000 | 22000 µF | 20% | 63 V
Audio Note RES-NM35-1W-270K | 270 kΩ | 1 W | 1%
Jantzen Audio 002-0625 | 8.2 Ω | 5 W | 5% | Ceramic Resistor
Audio Note RES-NM35-1W-330K | 330 kΩ | 1 W | 1%
Jantzen Audio 002-0619 | 6.8 Ω | 5 W | 5% | Ceramic Resistor
Audyn KPQS/047/630 | 0.47 µF | 5% | 630 V | QS6 Capacitor
Mundorf SESG-0.33T2.1000 | 0.33 µF | 2% | 1000 V | MCap SUPREME EVO SilverGold Oil Capacitor
Audio Note RES-NM35-1W-390K | 390 kΩ | 1 W | 1%
Jantzen Audio 002-0613 | 5.6 Ω | 5 W | 5% | Ceramic Resistor
Audio Note RES-NM35-1W-470K | 470 kΩ | 1 W | 1%
Audyn MKTA/6.8/160 | 6.8 µF | 5% | 160 V | MKT-A Capacitor
Audio Note RES-NM35-1W-560K | 560 kΩ | 1 W | 1%
Jantzen Audio 002-0607 | 4.7 Ω | 5 W | 5% | Ceramic Resistor
Audio Note RES-NM35-1W-680K | 680 kΩ | 1 W | 1%
Mundorf BL71-10 Air Core Coil, 10 mH | DCR 3.38 Ω | ±2%
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























