Crossover Components
Jantzen Audio 000-1959 | 7.0 mH | 1.60 Ω | 3% | 18 AWG | Air-core Coil
Audio Note CAP-100-STDR-22U-100V | 22 µF | 20% | 100 V
Audio Note CAP-100-STDR-50U-63V | 50 µF | 20% | 63 V
Audyn Q2/2.2/250 | 2.2 µF | 5% | 250 V | Q2 Capacitor
ClarityCap PUR30uH250Vdc | 30 µF | 3% | 250 V
Audyn MKTA/3.9/250 | 3.9 µF | 5% | 250 V | MKT-A Capacitor
Jantzen Audio 000-5424 | 4.7 mH | 0.191 Ω | 3% | 14 AWG | H Iron-core Coil
Audyn ATC/0.47/630 | 0.47 µF | 2% | 630 V | True Copper Capacitor
Audyn MKTA/3.9/160 | 3.9 µF | 5% | 160 V | MKT-A Capacitor
Intertechnik MKTR/033/100 | 0.33 µF | 5% | 100 V
Jantzen Audio 000-7304 | 0.24 mH | 0.11 Ω | 2% | 14 AWG | Copper Foil Coil
Audyn ATC/0.56/630 | 0.56 µF | 2% | 630 V | True Copper Capacitor
Mundorf L100-1.20 | 1.20 mH | 0.54 Ω | 2% | 18 AWG | Air-core Coil
Jantzen Audio 001-0299 | 300 µF | 5% | 400 V | Cross Cap Capacitor
Mundorf H50-4.7 Iron Core Coil, 4.7 mH | DCR 1.06 Ω | ±3%
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























