Crossover Components
Jantzen Audio 000-5477 | 4.7 mH | 0.405 Ω | 3% | 18 AWG | H Iron-core Coil
Jantzen Audio 000-5190 | 27 mH | 2.45 Ω | 3% | 22 AWG | H Iron-core Coil
Jantzen Audio 000-5061 | 10 mH | 0.91 Ω | 3% | 20 AWG | H Iron-core Coil
LU44/30-AG/1.30 | 1.3 mH | 0.87 Ω | 3% | 20 AWG | True Silver Coil
Jantzen Audio 000-5005 | 1.3 mH | 0.165 Ω | 3% | 17 AWG | H Iron-core Coil
Jantzen Audio 000-0022 | 1.4 mH | 0.294 Ω | 3% | 14 AWG | Air-core Coil
Jantzen Audio 000-0023 | 1.5 mH | 0.305 Ω | 3% | 14 AWG | Air-core Coil
Jantzen Audio 000-0114 | 0.82 mH | 0.18 Ω | 3% | 13 AWG | Air-core Coil
Jantzen Audio 000-0923 | 4.5 mH | 0.93 Ω | 3% | 17 AWG | Air-core Coil
Jantzen Audio 000-1098 | 2.5 mH | 0.52 Ω | 3% | 15 AWG | Air-core Coil
Jantzen Audio 000-1626 | 1.25 mH | 0.61 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1246 | 2.2 mH | 0.473 Ω | 3% | 15 AWG | Air-core Coil
Jantzen Audio 000-1962 | 10 mH | 1.95 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1310 | 0.33 mH | 0.16 Ω | 3% | 15 AWG | Air-core Coil
Jantzen Audio 000-1283 | 1.5 mH | 0.64 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1155 | 0.25 mH | 0.14 Ω | 3% | 15 AWG | Air-core Coil
Jantzen Audio 000-8593 | 0.60 mH | 0.27 Ω | 2% | 16 AWG | Wax Coil
Jantzen Audio 000-8605 | 0.70 mH | 0.30 Ω | 2% | 16 AWG | Wax Coil
Mundorf LL45-0,27 | 0.27 mH | 0.20 Ω | 2% | 17 AWG | MCoil AirCore Hepta Strand Coil
Mundorf P50-8.2 | 8.2 mH | 3.01 Ω | 3% | 24 AWG | Iron-core Coil
Mundorf P100-0.68 | 0.68 mH | 0.23 Ω | 3% | 18 AWG | Iron-core Coil
Dayton Audio IC182 | 2.0 mH| 0.29 Ω | 3% | 18 AWG | Iron-core Coil
Dayton Audio AC202 | 2.0 mH | 1.06 Ω | 5% | 20 AWG | Air-core Coil
Intertechnik LU55/010/140 | 0.1 mH | 0.08 Ω | 3% | 15 AWG
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























