Crossover Components
Mundorf L71-0.68 Air Core Coil, 0.68 mH | DCR 0.71 Ω | ±2%
Intertechnik HQ58/2.7/160 | 2.7 mH | 0.11 Ω | 5% | 14 AWG
Amplimo 38611 80 VA | 2 x 9 V Toroidal Transformer
Intertechnik LU62/1.8/140 | 1.8 mH | 0.38 Ω | 3% | 15 AWG
Intertechnik LU92/039/200 | 0.39 mH | 0.10 Ω | 3% | 12 AWG
Mundorf L100-8.20 | 8.20 mH | 1.69 Ω | 2% | 18 AWG | Air-core Coil
Mundorf L100-0.68 | 0.68 mH | 0.39 Ω | 2% | 18 AWG | Air-core Coil
Jantzen Audio 000-5391 | 18 mH | 3.22 Ω | 3% | 24 AWG | H Iron-core Coil
Mundorf L71-27 Air Core Coil, 27 mH | DCR 5.95 Ω
Jantzen Audio 000-5354 | 2.7 mH | 0.295 Ω | 3% | 18 AWG | H Iron-core Coil
Jantzen Audio 000-5318 | 22 mH | 3.6 Ω | 3% | 24 AWG | H Iron-core Coil
Jantzen Audio 000-5310 | 10 mH | 1.29 Ω | 3% | 21 AWG | H Iron-core Coil
Jantzen Audio 000-5161 | 3.3 mH | 0.359 Ω | 3% | 18 AWG | H Iron-core Coil
Jantzen Audio 000-5098 | 6.8 mH | 0.70 Ω | 3% | 20 AWG | H Iron-core Coil
Jantzen Audio 000-5096 | 2.5 mH | 0.28 Ω | 3% | 18 AWG | H Iron-core Coil
Jantzen Audio 000-2379 | 2.0 mH | 0.40 Ω | 3% | 18 AWG | I Iron-core Coil
Jantzen Audio 000-2374 | 1.0 mH | 0.19 Ω | 3% | 17 AWG | I Iron-core Coil
Jantzen Audio 000-2060 | 2.2 mH | 0.40 Ω | 3% | 18 AWG | I Iron-core Coil
Jantzen Audio 000-1973 | 0.82 mH | 0.44 Ω | 3% | 18 AWG | Air-core Coil
Intertechnik HQ58/5.6/140 | 5.6 mH | 0.22 Ω | 5% | 15 AWG
Intertechnik TRI62/022/0.60 | 0.22 mH | 0.11 Ω | 1% | 23 AWG
Jantzen Audio 000-1608 | 8.2 mH | 5.83 Ω | 3% | 24 AWG | Air-core Coil
Audyn CO62/1.80/140 | 1.8 mH | 0.27 Ω | 5% | 15 AWG | Corobar Coil
Jantzen Audio 000-1200 | 3.3 mH | 1.76 Ω | 3% | 21 AWG | Air-core Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























