Capacitors
Audyn Q2/6.8/250 | 6.8 µF | 5% | 250 V | Q2 Capacitor
Mundorf MEO-56T3.350 | 56 µF | 3% | 350 V | Oil
Audyn KPQS/2.2/400 | 2.2 µF | 5% | 400 V | QS4 Capacitor
Audio Note CAP-3170 | 0.01 µF | 10% | 630 V
Audio Note CAP-3180 | 0.015 µF | 10% | 630 V
ClarityCap PX | 3.90 µF | 5% | 250 V
Audio Note CAP-3185 | 0.018 µF | 10% | 630 V
Audio Note CAP-3190 | 0.022 µF | 10% | 630 V
Audio Note CAP-3200 | 0.033 µF | 10% | 630 V
Audio Note CAP-3210 | 0.039 µF | 10% | 630 V
Audio Note CAP-3220 | 0.047 µF | 10% | 630 V
Audio Note CAP-3230 | 0.068 µF | 10% | 630 V
ClarityCap CMR | 6.80 µF | 3% | 400 V
Audyn Q2/5.6/250 | 5.6 µF | 5% | 250 V | Q2 Capacitor
Audyn KPQS/82/400 | 82 µF | 5% | 400 V | QS4 Capacitor
ClarityCap CMR | 8.20 µF | 3% | 400 V
ClarityCap PUR22uH250Vdc | 22 µF | 3% | 250 V
Audyn KPQS/1.5/400 | 1.5 µF | 5% | 400 V | QS4 Capacitor
Dayton Audio DMPC-12 | 12 µF | 5% | 250 V | Polypropylene Capacitor
Read more: Capacitors
The capacitor is the heart of the high-pass filter: it shields the tweeter from low frequencies and smooths impedance in Zobel and notch networks. The part sitting in a tweeter's signal path passes every note, so both type and quality are audible.
Film capacitors (MKP, MKT, paper-in-oil, copper foil) belong in the signal path, bipolar electrolytics suit high-value bass sections, and power capacitors go into supplies. For crossovers, choose at least a 100 V rating and a tolerance of 5% or better.























