BlieSMa M74A-6 Mid-range woofer
Stock details
| Impedance | |
| Sensitivity (SPL at 1 m / 2.83 V) | |
| Resonance frequency (Fs) | |
| Maximum linear deflection (Xmax) | |
| Total Q (Qts) |
| Electromagnetic Q (Qes) | |
| Mechanical Q (Qms) | |
| DC resistance (Re) | |
| Voice coil inductance (L_e) | |
| BL product (BL) | |
| The surface area of the cone (Sd) | |
| Moving mass with air load (Mms) | |
| Woofer type | |
| Voice coil diameter | |
| Voice coil wire material |
BlieSMa is a German manufacturer that builds high-end drivers by hand in small batches; every unit is measured before it leaves the workshop. The M74 series is a dome midrange: the 74 mm voice coil drives a large, light dome directly, so the diaphragm moves as a piston across the whole midrange, without the break-up typical of cone midranges. The M74A-6 is the 95 dB member of the series, with a Qts of 0.67 and a resonance frequency of 400 Hz.
- Sensitivity: 95 dB (2.83 V / 1 m)
- Inductance (Le): 0.036 mH
- Qms: 6.4
- Qes: 0.75
- Qts: 0.67
- Xmax: 1.2 mm
- DC resistance (Re): 5.6 Ω
- Voice coil wire: CCAW
- Impedance: 6 Ω
- Resonance frequency (Fs): 400 Hz
- Voice coil diameter: 74 mm
- Moving mass (Mms): 2.3 g
- Cone area (Sd): 50.25 cm²
- BL: 6.8 Tm
It is typically crossed between about 500–600 Hz and 4–5 kHz in three-way speakers. The wide, even dispersion of the dome keeps the stereo image stable off-axis, and the very low inductance (0.036 mH) gives a flat impedance curve and a simpler crossover.
Design tip: the dome midrange has its own sealed rear chamber, so no separate midrange enclosure is needed. Second- or fourth-order filters work well towards the tweeter; because of the high sensitivity, the woofer and tweeter often need to be matched to it with a resistive attenuator.
No reviews for this product yet.
Bought this product? Sign in to review it quickly!
Sign in to review















