BlieSMa M74S-6 Mid-range woofer
Stock details
| Impedance | |
| Sensitivity (SPL at 1 m / 2.83 V) | |
| Resonance frequency (Fs) | |
| Maximum linear deflection (Xmax) | |
| Total Q (Qts) |
| Electromagnetic Q (Qes) | |
| Mechanical Q (Qms) | |
| DC resistance (Re) | |
| Voice coil inductance (L_e) | |
| BL product (BL) | |
| The surface area of the cone (Sd) | |
| Moving mass with air load (Mms) | |
| Voice coil diameter | |
| Voice coil wire material |
BlieSMa is a German manufacturer that builds high-end drivers by hand in small batches; every unit is measured before it leaves the workshop. The M74 series is a dome midrange: the 74 mm voice coil drives a large, light dome directly, so the diaphragm moves as a piston across the whole midrange, without the break-up typical of cone midranges. The M74S-6 has 97 dB sensitivity, a Qts of 0.62 and a resonance frequency of 425 Hz.
- Sensitivity: 97 dB (2.83 V / 1 m)
- Inductance (Le): 0.036 mH
- Qms: 6.6
- Qes: 0.68
- Qts: 0.62
- Xmax: 1.2 mm
- DC resistance (Re): 5.6 Ω
- Voice coil wire: CCAW
- Impedance: 6 Ω
- Resonance frequency (Fs): 425 Hz
- Voice coil diameter: 74 mm
- Moving mass (Mms): 2 g
- Cone area (Sd): 50.25 cm²
- BL: 6.8 Tm
Its high sensitivity and controlled Qts suit high-efficiency designs, including horn-assisted or open-baffle speakers. The wide dispersion of the dome gives an even sound field, and the 0.036 mH inductance keeps the impedance flat into the upper midrange.
Design tip: the dome midrange has its own sealed rear chamber, so no separate midrange enclosure is needed. Second- or fourth-order filters work well towards the tweeter; because of the high sensitivity, the woofer and tweeter often need to be matched to it with a resistive attenuator.
No reviews for this product yet.
Bought this product? Sign in to review it quickly!
Sign in to review














