BlieSMa T34B-4 Beryllium Dome Tweeter Matched Pair
Stock details
| Diameter of the cone / dome | |
| Impedance | |
| Sensitivity (SPL at 1 m / 2.83 V) | |
| Power Handling (RMS) | |
| Resonance frequency (Fs) |
| Maximum linear deflection (Xmax) | |
| Total Q (Qts) | |
| Electromagnetic Q (Qes) | |
| Mechanical Q (Qms) | |
| DC resistance (Re) | |
| Voice coil inductance (L_e) | |
| BL product (BL) | |
| The surface area of the cone (Sd) | |
| Moving mass with air load (Mms) | |
| Tweeter type | |
| Voice coil diameter |
BlieSMa is a German manufacturer that builds high-end drivers by hand in small batches; every unit is measured before it leaves the workshop. The tweeters come as a matched pair: the frequency and sensitivity curves of the two units match closely, giving a precise and stable stereo image. The T34B-4 is the flagship of the series: a beryllium dome, a 34 mm voice coil and 3 mm of linear excursion.
- Sensitivity: 97.5 dB (2.83 V / 1 m)
- Inductance (Le): 0.008 mH
- Qms: 2.1
- Qes: 0.42
- Qts: 0.35
- Xmax: 3 mm
- DC resistance (Re): 3.3 Ω
- Dome / cone diameter: 31.8 mm
- Power handling (RMS): 80 W
- Impedance: 4 Ω
- Resonance frequency (Fs): 790 Hz
- Voice coil diameter: 34 mm
- Moving mass (Mms): 0.26 g
- Cone area (Sd): 10.5 cm²
- BL: 3.5 Tm
The stiffness of beryllium and the large voice coil together give low distortion, high power handling and a very low possible crossover (around 1.5 kHz). With 97.5 dB sensitivity it suits high-efficiency flagship two- and three-way speakers.
Design tip: always put at least a series capacitor in front of the tweeter, and without measurements choose a higher crossover point. Because of the high sensitivity, an L-pad or series/parallel resistor divider may be needed for level matching.
No reviews for this product yet.
Bought this product? Sign in to review it quickly!
Sign in to review










