Dayton Audio DC160S-4 6-1/2" Classic Shielded Woofer 4 Ohm
Stock details
| Nominal diameter | |
| Impedance | |
| Resonance frequency (Fs) | |
| Shielded | |
| Sensitivity (SPL at 1 m / 2.83 V) |
| Maximum linear deflection (Xmax) | |
| Total Q (Qts) | |
| Electromagnetic Q (Qes) | |
| Mechanical Q (Qms) | |
| DC resistance (Re) | |
| Voice coil inductance (L_e) | |
| BL product (BL) | |
| The surface area of the cone (Sd) | |
| Equivalent volume (Iron) | |
| Moving mass with air load (Mms) | |
| Mechanical compliance of the suspension (Cms) | |
| Volume of displacement (Vd) | |
| Woofer type | |
| Membrane material | |
| Surround material | |
| Voice coil diameter | |
| Voice coil carrier | |
| Voice coil wire material | |
| Magnetic material | |
| Basket / frame material | |
| Subwoofer Series | |
| Cutout diameter | |
| # Mounting holes | |
| Depth | |
| Enclosed volume | |
| Open volume | |
| Cutoff frequency (–3 dB) | |
| Cutoff frequency (open, -3 dB) |
The DC160S-4 from the Dayton Audio Classic series is a 6.5" (165 mm) woofer with a treated paper cone, rubber surround, copper voice coil on an aluminium former and a magnetically shielded ferrite motor. The paper cone gives a natural, uncoloured midrange and the rubber surround lasts for many years.
- Sensitivity: 88.5 dB (2.83 V / 1 m)
- Inductance (Le): 0.89 mH
- Qms: 2.61
- Qes: 0.34
- Qts: 0.3
- Xmax: 3.4 mm
- Cut-out diameter: 144.6 mm
- DC resistance (Re): 3.5 Ω
- Nominal diameter: 165.1 mm
- Voice coil wire: copper
- Mounting depth: 95 mm
- Cone: treated paper
- Magnet: ferrite
- Basket: steel
- Surround: rubber
- Impedance: 4 Ω
- Resonance frequency (Fs): 30.9 Hz
- Voice coil diameter: 35 mm
- Moving mass (Mms): 30 g
- Cone area (Sd): 136.8 cm²
- BL: 7.68 Tm
A 30.9 Hz resonance, a Qts of 0.30 and a Vas of 23.2 litres point clearly to a vented enclosure: in a suitable bass-reflex box the -3 dB point is about 52 Hz, in a sealed box about 90 Hz. It suits two-way bookshelf and floor-standing speakers and home-theatre centre channels, where the shielding lets the speaker sit close to a screen.
Design tip: in a two-way system, cross it to a tweeter at around 2–3 kHz. Its 88.5 dB sensitivity pairs with most 25 mm dome tweeters with only a little attenuation.
No reviews for this product yet.
Bought this product? Sign in to review it quickly!
Sign in to review











