miniDSP 2x4 Boxed Digital Signal Processor
Stock details
| Processing resolution and sampling rate | |
| Compatible with Windows and Mac | |
| Audio input connectivity | |
| Audio Output Connection | |
| Input/Output Configuration |
| Device series | |
| Device type | |
| Calibration software | |
| Maximum input level | |
| Dimensions (mm) | |
| Performance | |
| Input impedance | |
| Output impedance | |
| DSP |
The miniDSP 2x4 Boxed is a boxed digital signal processor with two analogue inputs and four analogue outputs. miniDSP processors from Hong Kong are among the most widely used DSP solutions for DIY speaker builders and car-audio enthusiasts. With plugins running on the Analog Devices ADAU1701 DSP, all processing is configured from a computer via USB.
- DSP: Analog Devices ADAU1701
- Inputs / outputs: 2 / 4 (RCA)
- Processing: 24–56 bit, 48 kHz
- Max. input level: 0.9 / 2 Vrms (selectable)
- Power: 5 V DC via USB
- Size: 107 x 94 x 26 mm
A typical setup is a two-way stereo active crossover: woofer and tweeter outputs per channel, with freely selectable crossover frequency and slope (Butterworth, Linkwitz-Riley), parametric EQ, delay, polarity inversion and level matching. It can equally be used to integrate a subwoofer or tame room modes.
The miniDSP 2x4 is a popular choice for active speaker kits, subwoofer integration and car audio; settings are stored in the processor, so the computer can be disconnected after setup. Four presets can be saved and switched, also by infrared remote control.
Tip: input sensitivity is selectable between 0.9 V and 2 V, so it matches both consumer (RCA) and professional levels. As an active crossover it needs four amplifier channels; a measurement microphone (e.g. UMIK-1) and measurement software (REW) help a lot with the setup.
No reviews for this product yet.
Bought this product? Sign in to review it quickly!
Sign in to review












