Monacor LSI-47T | 4.7 mH | 0.14 Ω | 5% | 17 AWG
Stock details
The Monacor LSI series is a transformer-core (laminated iron core) crossover inductor. The core multiplies the inductance, so far less wire is needed for a given value than with an air-core coil: the inductor is smaller, more affordable and its DC resistance stays low. The LSI-47T is a 4.7 mH, ±5% inductor wound with 1.2 mm (17 AWG) wire, with a DC resistance of only 0.14 Ω.
- Inductance: 4.7 mH
- Wire diameter: 1.2 mm
- DC resistance: 0.14 Ω
- Wire (AWG): 17
It is recommended for the low-pass filter of woofers in two- and three-way crossovers where low series resistance matters. With 4–8 Ω woofers, 4.7 mH typically suits a low crossover of a few hundred hertz, and the 1.2 mm wire handles high power.
An iron-core inductor can saturate if a very large current flows through it, so it is mainly recommended at home hi-fi power levels and in bass filters; the tweeter section needs an air-core coil. Monacor LSI inductors offer a low-loss solution at an attractive price.
Design tip: the DC resistance of an inductor in series with the woofer reduces damping and efficiency, so in the bass section the lowest possible DCR is the goal. Mount the inductors on the crossover board apart from each other with their axes at right angles, so they do not couple.
No reviews for this product yet.
Bought this product? Sign in to review it quickly!
Sign in to review








