Crossover Components
Audyn CO62/2.20/140 | 2.2 mH | 0.29 Ω | 5% | 15 AWG | Corobar Coil
Intertechnik LUT32/012/10 | 0.12 mH | 0.19 Ω | 3% | 18 AWG
Mundorf L50-1.5 Air Core Coil, 1.5 mH | DCR 1.98 Ω | ±2%
Mundorf L71-0.39 Air Core Coil, 0.39 mH | DCR 0.52 Ω | ±2%
Mundorf BL71-0.33 Air Core Coil, 0.33 mH | DCR 0.47 Ω | ±2%
Jantzen Audio 000-0030 | 2.5 mH | 0.41 Ω | 3% | 14 AWG | Air-core Coil
Jantzen Audio 000-0031 | 2.6 mH | 0.422 Ω | 3% | 14 AWG | Air-core Coil
Jantzen Audio 000-0126 | 1.8 mH | 0.275 Ω | 3% | 13 AWG | Air-core Coil
Jantzen Audio 000-1099 | 4.0 mH | 0.72 Ω | 3% | 15 AWG | Air-core Coil
Jantzen Audio 000-1187 | 4.7 mH | 0.76 Ω | 3% | 15 AWG | Air-core Coil
Jantzen Audio 000-6005 | 0.82 mH | 0.03 Ω | 5% | 13 AWG | C-Coil Toroidal Coil
Jantzen Audio 000-6035 | 1.5 mH | 0.05 Ω | 5% | 14 AWG | C-Coil Toroidal Coil
Jantzen Audio 000-6105 | 2.7 mH | 0.07 Ω | 5% | 14 AWG | C-Coil Toroidal Coil
Jantzen Audio 000-6115 | 3.0 mH | 0.07 Ω | 5% | 14 AWG | C-Coil Toroidal Coil
Jantzen Audio 000-6125 | 3.3 mH | 0.07 Ω | 5% | 14 AWG | C-Coil Toroidal Coil
Mundorf L100-0.33 | 0.33 mH | 0.26 Ω | 2% | 18 AWG | Air-core Coil
Jantzen Audio 000-5586 | 1.75 mH | 0.24 Ω | 3% | 18 AWG | H Iron-core Coil
Jantzen Audio 000-7875 | 1.8 mH | 0.52 Ω | 2% | 16 AWG | Copper Foil Coil
Jantzen Audio 000-5003 | 1.5 mH | 0.23 Ω | 3% | 18 AWG | H Iron-core Coil
Jantzen Audio 000-8030 | 0.30 mH | 0.10 Ω | 2% | 12 AWG | Impregnated Copper Foil Coil
Jantzen Audio 000-1990 | 0.56 mH | 0.39 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1688 | 0.15 mH | 0.105 Ω | 3% | 15 AWG | Air-core Coil
Jantzen Audio 000-1373 | 0.56 mH | 0.40 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1273 | 0.18 mH | 0.105 Ω | 3% | 15 AWG | Air-core Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























