Crossover Components
Jantzen Audio 000-L-0010 | 0.10 mH | 0.09 Ω | 3% | 15 AWG | Litz Coil
Jantzen Audio 000-5481 | 1.2 mH | 0.173 Ω | 3% | 18 AWG | H Iron-core Coil
Intertechnik LU78/2.2/140 | 2.2 mH | 0.46 Ω | 3% | 15 AWG
Jantzen Audio 000-5224 | 2.2 mH | 0.26 Ω | 3% | 18 AWG | H Iron-core Coil
Jantzen Audio 000-5199 | 1.8 mH | 0.22 Ω | 3% | 18 AWG | H Iron-core Coil
Jantzen Audio 000-5094 | 1.5 mH | 0.20 Ω | 3% | 18 AWG | H Iron-core Coil
FOIL0.22 | 0.22 mH | 0.11 Ω | 2% | 14 AWG | Copper Foil Inductor
Jantzen Audio 000-2390 | 1.8 mH | 0.33 Ω | 3% | 18 AWG | I Iron-core Coil
Jantzen Audio 000-2056 | 0.71 mH | 0.17 Ω | 3% | 17 AWG | I Iron-core Coil
Jantzen Audio 000-1952 | 0.65 mH | 0.38 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1921 | 0.22 mH | 0.17 Ω | 3% | 17 AWG | Air-core Coil
Mundorf LL45-0.47 Air Core Coil, 0.47 mH | DCR 0.27 Ω | ±2%
Jantzen Audio 000-1851 | 0.60 mH | 0.41 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1676 | 0.82 mH | 0.439 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1609 | 6.8 mH | 5.28 Ω | 3% | 24 AWG | Air-core Coil
Jantzen Audio 000-1378 | 2.7 mH | 1.56 Ω | 3% | 21 AWG | Air-core Coil
Jantzen Audio 000-1335 | 0.30 mH | 0.18 Ω | 3% | 17 AWG | Air-core Coil
Jantzen Audio 000-1103 | 1.5 mH | 0.90 Ω | 3% | 20 AWG | Air-core Coil
FOIL0.33 | 0.33 mH | 0.13 Ω | 2% | 14 AWG | Copper Foil Inductor
Jantzen Audio 000-1075 | 0.75 mH | 0.42 Ω | 3% | 18 AWG | Air-core Coil
Intertechnik TRI62/056/0.50 | 0.56 mH | 0.257 Ω | 1% | 24 AWG
Jantzen Audio 000-0927 | 0.62 mH | 0.38 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-0866 | 0.72 mH | 0.40 Ω | 3% | 18 AWG | Air-core Coil
Intertechnik HQR32/1.2/71 | 1.2 mH | 0.61 Ω | 5% | 21 AWG
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























