Crossover Components
TRI/DR56/2.20 | 2.2 mH | 0.15 Ω | 3% | 24 AWG | Tritec Coil
Dayton Audio LW18-60 | 0.60 mH | 0.38 Ω | 3% | 18 AWG | Air-core Coil
Mundorf L50-0.68 Air Core Coil, 0.68 mH | DCR 1.31 Ω | ±2%
Mundorf BL71-0.15 Air Core Coil, 0.15 mH | DCR 0.31 Ω | ±2%
Jantzen Audio 000-1506 | 7.0 mH | 0.98 Ω | 3% | 15 AWG | Air-core Coil
Mundorf CFC16-2.20 | 2.20 mH | 0.59 Ω | 2% | 16.5 AWG | Foil Coil
Mundorf L100-0.15 | 0.15 mH | 0.14 Ω | 2% | 18 AWG | Air-core Coil
TRI/DR56/2.70 | 2.7 mH | 0.15 Ω | 3% | 24 AWG | Tritec Coil
Jantzen Audio 000-5340 | 0.22 mH | 0.04 Ω | 3% | 15 AWG | H Iron-core Coil
Jantzen Audio 000-5299 | 4.7 mH | 0.75 Ω | 3% | 21 AWG | H Iron-core Coil
Jantzen Audio 000-5280 | 2.2 mH | 0.40 Ω | 3% | 20 AWG | H Iron-core Coil
Jantzen Audio 000-5240 | 18 mH | 4.07 Ω | 3% | 26 AWG | H Iron-core Coil
Intertechnik LU92/1.0/200 | 1.0 mH | 0.17 Ω | 3% | 12 AWG
Jantzen Audio 000-5135 | 10 mH | 1.94 Ω | 3% | 24 AWG | H Iron-core Coil
Jantzen Audio 000-2470 | 11 mH | 3.01 Ω | 3% | 24 AWG | I Iron-core Coil
Jantzen Audio 000-2297 | 2.2 mH | 0.48 Ω | 3% | 20 AWG | I Iron-core Coil
Jantzen Audio 000-2269 | 3.9 mH | 0.80 Ω | 3% | 21 AWG | I Iron-core Coil
Jantzen Audio 000-2252 | 10 mH | 2.82 Ω | 3% | 24 AWG | I Iron-core Coil
Mundorf LL45-0,82 | 0.82 mH | 0.38 Ω | 2% | 17 AWG | MCoil AirCore Hepta Strand Coil
Jantzen Audio 000-2031 | 2.0 mH | 0.53 Ω | 3% | 20 AWG | I Iron-core Coil
Jantzen Audio 000-1986 | 0.27 mH | 0.26 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1865 | 1.5 mH | 1.10 Ω | 3% | 21 AWG | Air-core Coil
Jantzen Audio 000-6225 | 4.7 mH | 0.07 Ω | 5% | 14 AWG | C-Coil Toroidal Coil
Jantzen Audio 000-1859 | 0.82 mH | 0.63 Ω | 3% | 20 AWG | Air-core Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























