Crossover Components
Jantzen Audio 000-7050 | 0.56 mH | 0.13 Ω | 2% | 12 AWG | Copper Foil Coil
Jantzen Audio 000-1837 | 0.38 mH | 0.285 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-8385 | 1.4 mH | 0.32 Ω | 2% | 14 AWG | Impregnated Copper Foil Coil
Jantzen Audio 000-1746 | 0.33 mH | 0.31 Ω | 3% | 18 AWG | Air-core Coil
Mundorf BL100-15 Air Core Coil, 15 mH | DCR 2.41 Ω | ±2%
Intertechnik TRI92/0.56/0.60 | 0.56 mH | 0.19 Ω | 1% | 23 AWG
Intertechnik TO10/5.6 | 5.6 mH | 0.22 Ω | 5% | 16 AWG
Jantzen Audio 000-1436 | 0.96 mH | 0.99 Ω | 3% | 21 AWG | Air-core Coil
Jantzen Audio 000-1330 | 1.4 mH | 1.10 Ω | 3% | 21 AWG | Air-core Coil
Jantzen Audio 000-1313 | 0.30 mH | 0.24 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1231 | 1.0 mH | 0.72 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-1153 | 0.36 mH | 0.28 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1128 | 0.85 mH | 0.64 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-1117 | 0.37 mH | 0.28 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1092 | 0.15 mH | 0.12 Ω | 3% | 17 AWG | Air-core Coil
Jantzen Audio 000-1052 | 0.89 mH | 0.67 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-1022 | 0.33 mH | 0.26 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1009 | 0.35 mH | 0.275 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-0832 | 0.34 mH | 0.27 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-0179 | 0.67 mH | 0.55 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-0145 | 0.31 mH | 0.24 Ω | 3% | 18 AWG | Air-core Coil
Dayton Audio AC201-5 | 1.5 mH | 0.91 Ω | 5% | 20 AWG | Air-core Coil
Dayton Audio AC201-4 | 1.4 mH | 0.89 Ω | 5% | 20 AWG | Air-core Coil
Intertechnik LU32/022/071 | 0.22 mH | 0.39 Ω | 3% | 21 AWG
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























