Crossover Components
Amplimo 1N1729 Power Transformer Tube Amplifier 22 VA
Amplimo 2N465 Power Transformer Tube Amplifier 44 VA
Intertechnik LU92/1.2/200 | 1.2 mH | 0.18 Ω | 3% | 12 AWG
Jantzen Audio 000-0047 | 4.0 mH | 0.603 Ω | 3% | 14 AWG | Air-core Coil
Jantzen Audio 000-0134 | 2.6 mH | 0.374 Ω | 3% | 13 AWG | Air-core Coil
Jantzen Audio 000-6295 | 5.6 mH | 0.08 Ω | 5% | 14 AWG | C-Coil Toroidal Coil
Jantzen Audio 000-6430 | 8.2 mH | 0.11 Ω | 5% | 14 AWG | C-Coil Toroidal Coil
Jantzen Audio 000-6485 | 10 mH | 0.11 Ω | 5% | 14 AWG | C-Coil Toroidal Coil
Mundorf L100-0.12 | 0.12 mH | 0.15 Ω | 2% | 18 AWG | Air-core Coil
Jantzen Audio 000-1966 | 0.40 mH | 0.294 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1950 | 0.40 mH | 0.29 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1394 | 0.80 mH | 0.62 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-8060 | 0.60 mH | 0.14 Ω | 2% | 12 AWG | Impregnated Copper Foil Coil
Jantzen Audio 000-1196 | 0.45 mH | 0.31 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1191 | 0.44 mH | 0.31 Ω | 3% | 18 AWG | Air-core Coil
Dayton Audio AC20-80 | 0.80 mH | 0.64 Ω | 5% | 20 AWG | Air-core Coil
Mundorf BL71-0,10 | 0.10 mH | 0.23 Ω | 2% | 21 AWG | MCoil AirCore Baked Varnish Coil
Mundorf L71-0.15 Air Core Coil, 0.15 mH | DCR 0.31 Ω | ±2%
Mundorf BL71-0.12 Air Core Coil, 0.12 mH | DCR 0.28 Ω
Mundorf L50-0.56 Air Core Coil, 0.56 mH | DCR 1.16 Ω | ±2%
Amplimo 38012 80 VA | 2 x 80 V Toroidal Transformer
Amplimo 38017 80 VA | 2 x 30 V Toroidal Transformer
Amplimo 38021 80 VA | 2 x 24 V Toroidal Transformer
TRI/DR56/6.80 | 6.8 mH | 0.35 Ω | 3% | 24 AWG | Tritec Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























