Crossover Components
Jantzen Audio 000-1114 | 0.28 mH | 0.335 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-1089 | 1.0 mH | 1.57 Ω | 3% | 24 AWG | Air-core Coil
TO10/15 | 15 mH | 0.29 Ω | 5% | 16 AWG | Torobar Toroidal Coil
Jantzen Audio 000-1051 | 0.15 mH | 0.16 Ω | 3% | 18 AWG | Air-core Coil
Mundorf CFC14-2.20 | 2.20 mH | 0.41 Ω | 2% | 14 AWG | Foil Coil
Intertechnik TRI92/3.9/0.50 | 3.9 mH | 0.78 Ω | 1% | 24 AWG
Jantzen Audio 000-0295 | 0.68 mH | 0.87 Ω | 3% | 22 AWG | Air-core Coil
Dayton Audio AC20-90 | 0.90 mH | 0.71 Ω | 5% | 20 AWG | Air-core Coil
Amplimo 4N1885 Power Transformer Tube Amplifier 119 VA
Amplimo 4N605 Power Transformer Tube Amplifier 100 VA
Mundorf L50-0,12 | 0.12 mH | 0.42 Ω | 2% | 24 AWG | MCoil AirCore Coil
Amplimo XA261 Power Transformer Tube Amplifier 121 VA
Mundorf L50-0.15 Air Core Coil, 0.15 mH | DCR 0.45 Ω | ±2%
Mundorf L50-0.18 Air Core Coil, 0.18 mH | DCR 0.52 Ω | ±2%
Intertechnik Tritec HQ 40 air-core inductor – 6.80 mH | TRI/DR56 | DCR 0.35 Ω | Cu Tritec 7×0.50 mm | ±3.0%
Intertechnik LU120/1.8/20 | 1.8 mH | 0.25 Ω | 3% | 12 AWG
Intertechnik TRI92/1.80/0.60 | 1.8 mH | 0.37 Ω | 1% | 23 AWG
Mundorf CFC16-5.60 | 5.60 mH | 1.05 Ω | 2% | 16.5 AWG | Foil Coil
Mundorf LL45-2.2 Air Core Coil, 2.2 mH | DCR 0.66 Ω
Jantzen Audio 000-1661 | 0.32 mH | 0.47 Ω | 3% | 21 AWG | Air-core Coil
Jantzen Audio 000-1474 | 0.40 mH | 0.53 Ω | 3% | 21 AWG | Air-core Coil
Jantzen Audio 000-1364 | 0.40 mH | 0.64 Ω | 3% | 21 AWG | Air-core Coil
Jantzen Audio 000-1294 | 0.47 mH | 0.64 Ω | 3% | 22 AWG | Air-core Coil
Dayton Audio LW18-33 | 0.33 mH | 0.28 Ω | 5% | 18 AWG | Air-core Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























