Crossover Components
Amplimo 50PP4K0G Output Transformer Push-Pull 55 Watt
Mundorf L50-0,10 | 0.10 mH | 0.36 Ω | 2% | 24 AWG | MCoil AirCore Coil
HQG36/1.5/85 | 1.5 mH | 0.25 Ω | 5% | 20 AWG | Bell Core Coil
Jantzen Audio 000-8126 | 1.6 mH | 0.25 Ω | 2% | 12 AWG | Impregnated Copper Foil Coil
Intertechnik TRI92/4.7/0.50 | 4.7 mH | 0.88 Ω | 1% | 24 AWG
Audyn CO92/10.0/140 | 10 mH | 0.87 Ω | 5% | 15 AWG | Corobar Coil
Jantzen Audio 000-2406 | 0.18 mH | 0.13 Ω | 3% | 20 AWG | I Iron-core Coil
Jantzen Audio 000-2372 | 0.24 mH | 0.15 Ω | 3% | 20 AWG | I Iron-core Coil
Jantzen Audio 000-2289 | 0.33 mH | 0.19 Ω | 3% | 21 AWG | I Iron-core Coil
Mundorf CFC14-2.70 | 2.70 mH | 0.46 Ω | 2% | 14 AWG | Foil Coil
Jantzen Audio 000-2286 | 0.56 mH | 0.25 Ω | 3% | 21 AWG | I Iron-core Coil
HQG52/2.7/10 | 2.7 mH | 0.25 Ω | 5% | 18 AWG | Bell Core Coil
Jantzen Audio 000-2218 | 0.39 mH | 0.20 Ω | 3% | 20 AWG | I Iron-core Coil
Jantzen Audio 000-2216 | 0.36 mH | 0.19 Ω | 3% | 20 AWG | I Iron-core Coil
HQG52/3.0/10 | 3.0 mH | 0.30 Ω | 5% | 18 AWG | Bell Core Coil
Intertechnik Tritec HQ 40 air-core inductor – 8.20 mH | TRI/DR56 | DCR 0.40 Ω | Cu Tritec 7×0.50 mm | ±3.0%
Jantzen Audio 000-1869 | 2.2 mH | 3.5 Ω | 3% | 26 AWG | Air-core Coil
Jantzen Audio 000-1867 | 1.5 mH | 2.83 Ω | 3% | 26 AWG | Air-core Coil
Amplimo 88616 500 VA | 2 x 25 V Toroidal Transformer
Jantzen Audio 000-1858 | 0.82 mH | 1.35 Ω | 3% | 24 AWG | Air-core Coil
Amplimo 10PP9K0S Output Transformer Push-Pull 10 Watt
Jantzen Audio 000-1439 | 0.59 mH | 0.815 Ω | 3% | 22 AWG | Air-core Coil
Jantzen Audio 000-1419 | 0.26 mH | 0.50 Ω | 3% | 21 AWG | Air-core Coil
Jantzen Audio 000-1308 | 0.22 mH | 0.30 Ω | 3% | 20 AWG | Air-core Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























