Crossover Components
Jantzen Audio 001-0224 | 0.56 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 001-0222 | 0.51 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 001-0220 | 0.47 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 001-0218 | 0.43 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 001-0216 | 0.39 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 001-0214 | 0.33 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 001-0212 | 0.30 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 001-0210 | 0.27 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 001-0208 | 0.22 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 001-0206 | 0.18 µF | 5% | 400 V | Cross Cap Capacitor
Dayton Audio PMPC-0.22 | 0.22 µF | 1% | 250 V | Preciziós Audio Capacitor
Dayton Audio DMPC-1.5 | 1.5 µF | 5% | 250 V | Polypropylene Capacitor
Dayton Audio DMPC-1.0 | 1.0 µF | 5% | 250 V | Polypropylene Capacitor
Dayton Audio DMPC-0.10 | 0.10 µF | 5% | 250 V | Polypropylene Capacitor
Dayton Audio DMPC-0.68 | 0.68 µF | 5% | 250 V | Polypropylene Capacitor
Dayton Audio DMPC-0.47 | 0.47 µF | 5% | 250 V | Polypropylene Capacitor
Dayton Audio DMPC-0.33 | 0.33 µF | 5% | 250 V | Polypropylene Capacitor
Dayton Audio DMPC-0.22 | 0.22 µF | 5% | 250 V | Polypropylene Capacitor
Jantzen Audio 001-0204 | 0.15 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 001-0202 | 0.12 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 001-0200 | 0.10 µF | 5% | 400 V | Cross Cap Capacitor
Jantzen Audio 000-5151 | 1.8 mH | 0.17 Ω | 3% | 17 AWG | H Iron-core Coil
Jantzen Audio 000-2813 | 3.3 mH | 0.38 Ω | 3% | 18 AWG | Iron Core Coil
Jantzen Audio 000-2338 | 2.7 mH | 0.385 Ω | 3% | 18 AWG | I Iron-core Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























