Crossover Components
Jantzen Audio 000-0887 | 0.47 mH | 0.25 Ω | 3% | 17 AWG | Air-core Coil
Jantzen Audio 000-2817 | 2.2 mH | 0.29 Ω | 3% | 18 AWG | Iron Core Coil
Jantzen Audio 000-2340 | 1.8 mH | 0.293 Ω | 3% | 18 AWG | I Iron-core Coil
Intertechnik LU32/033/071 | 0.33 mH | 0.48 Ω | 3% | 21 AWG
Intertechnik LU32/027/071 | 0.27 mH | 0.43 Ω | 3% | 21 AWG
Jantzen Audio 000-1446 | 0.27 mH | 0.26 Ω | 3% | 18 AWG | Air-core Coil
Intertechnik LU32/015/071 | 0.15 mH | 0.32 Ω | 3% | 21 AWG
Intertechnik LU32/010/071 | 0.1 mH | 0.26 Ω | 3% | 21 AWG
Jantzen Audio 000-1130 | 0.15 mH | 0.16 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1840 | 0.40 mH | 0.43 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-1835 | 0.33 mH | 0.39 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-1832 | 0.30 mH | 0.37 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-1828 | 0.27 mH | 0.33 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-1146 | 0.15 mH | 0.29 Ω | 3% | 21 AWG | Air-core Coil
Jantzen Audio 000-1824 | 0.20 mH | 0.29 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-1815 | 0.15 mH | 0.23 Ω | 3% | 20 AWG | Air-core Coil
Jantzen Audio 000-1002 | 0.10 mH | 0.19 Ω | 3% | 20 AWG | Air-core Coil
Dayton Audio XO2W-3.5K 2-Way Speaker Crossover 3500 Hz
Jantzen Audio 000-L-0050 | 0.50 mH | 0.23 Ω | 3% | 15 AWG | Litz Coil
Intertechnik WAX10/22.0/5 | 22 Ω | 10 W | 5%
Intertechnik WAX10/18.0/5 | 18 Ω | 10 W | 5%
Intertechnik LP/2WEG/K Universal PCB Board | 120 x 73 mm
Dayton Audio Low Pass Speaker Crossover 12 dB/Octave, 8 Ohm
Dynavox Low-Pass Filter | 500 Hz | 4/8 Ohm
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























