Crossover Components
Jantzen Audio 000-L-0055 | 0.55 mH | 0.24 Ω | 3% | 15 AWG | Litz Coil
Jantzen Audio 000-7632 | 0.16 mH | 0.13 Ω | 2% | 16 AWG | Copper Foil Coil
Mundorf ME-6.80T3.450 | 6.80 µF | 3% | 450 V | MCap EVO Capacitor
Mundorf MLAL450-100+100 | 100 + 100 µF | 20% | 450 V | MLytic HV Power Capacitor
Intertechnik WAX10/27.0/5 | 27 Ω | 10 W | 5%
Intertechnik WAX10/15.0/5 | 15 Ω | 10 W | 5%
Intertechnik WAX10/33.0/5 | 33 Ω | 10 W | 5%
BlockBoard LP03/Base Epoxy Universal PCB | 160 x 100 mm
Intertechnik LU55/082/100 | 0.82 mH | 0.52 Ω | 3% | 18 AWG
ClarityCap CSA | 4.50 µF | 3% | 250 V
Mundorf MLGO40-4700 | 4700 µF | 20% | 40 V
Mundorf MLGO63-4700 | 4700 µF | 20% | 63 V
Intertechnik WAX10/39.0/5 | 39 Ω | 10 W | 5%
Intertechnik WAX10/47.0/5 | 47 Ω | 10 W | 5%
Intertechnik BlockBoard LP07 Universal PCB | 150 x 75 mm
Speaker Crossover 3-Way 8 Ohm 800/5000 Hz 100W
Dayton Audio Low Pass Speaker Crossover 12 dB/Octave, 8 Ohm, 700 Hz Assembled crossover
Dayton Audio Low Pass Speaker Crossover 12 dB/Octave, 8 Ohm, 600 Hz Assembled crossover
Intertechnik LU55/039/140 | 0.39 mH | 0.18 Ω | 3% | 15 AWG
Electrolytic Polarized Multi-Section Can Cap | 100uf + 100uf | 500V
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























