Crossover Components
Jantzen Audio 000-1300 | 1.5 mH | 0.52 Ω | 3% | 17 AWG | Air-core Coil
ClarityCap CSA | 3.90 µF | 3% | 250 V
Mundorf MCAP250-22 | 22 µF | 5% | 250 V | Mcap Classic Capacitor
Jantzen Audio 012-0362 Gold-Plated Screw Terminals For PCB mounting
Dayton Audio Low Pass Speaker Crossover 12 dB/Octave, 4 Ohm
Jantzen Audio 000-1081 | 0.93 mH | 0.30 Ω | 3% | 15 AWG | Air-core Coil
Jantzen Audio 000-0954 | 0.30 mH | 0.10 Ω | 3% | 13 AWG | Air-core Coil
Mundorf ME-5.60T3.450 | 5.60 µF | 3% | 450 V | MCap EVO Capacitor
Mundorf MEO-3.90T3.450 | 3.90 µF | 3% | 450 V | Oil
Mundorf MR5-0.10 | 0.10 Ω | 5 W | 2% | Mresist MOX Metal-oxide Resistor
Beyma F-130 High Pass Crossover Pair
Jantzen Audio 000-0167 | 3.6 mH | 1.08 Ω | 3% | 18 AWG | Air-core Coil
Dayton Audio LW183 | 3.0 mH | 1.0 Ω | 3% | 18 AWG | Air-core Coil
Mundorf MLGO63-2200 | 2200 µF | 20% | 63 V
Audyn ERA/1200/63 | 1200 µF | 10% | 63 V | Bipolar Electrolytic Capacitor
Mundorf MLAL450-47+47 | 47 + 47 µF | 20% | 450 V | MLytic HV Power Capacitor
Mundorf MR5-0.33 | 0.33 Ω | 5 W | 2% | Mresist MOX Metal-oxide Resistor
PCB-S02 Cloverleaf Pitches Crossover Board | 12 x 20 cm
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























