Crossover Components
Intertechnik FE130/3.9/30 | 3.9 mH | 0.07 Ω | 5% | 9 AWG | Transformer Core Coil
Intertechnik FE130/180/20 | 18 mH | 0.33 Ω | 5% | 12 AWG | Transformer Core Coil
Intertechnik TRI120/3.90/0.80 | 3.9 mH | 0.39 Ω | 1% | 20 AWG
Intertechnik TRI/120/8.20/0.60 | 8.2 mH | 0.89 Ω | 1% | 23 AWG
Intertechnik E170/330/300 | 3.3 mH | 0.20 Ω | 3% | 9 AWG | Choke Coil
Intertechnik E170/390/300 | 3.9 mH | 0.23 Ω | 3% | 9 AWG | Choke Coil
Intertechnik FE130/4.7/30 | 4.7 mH | 0.08 Ω | 5% | 9 AWG | Transformer Core Coil
Intertechnik FE130/220/20 | 22 mH | 0.37 Ω | 5% | 12 AWG | Transformer Core Coil
Intertechnik TRI120/4.7/0.80 | 4.7 mH | 0.43 Ω | 1% | 20 AWG
Intertechnik TRI120/5.60/0.80 | 5.6 mH | 0.49 Ω | 1% | 20 AWG
Intertechnik FE130/5.6/30 | 5.6 mH | 0.09 Ω | 5% | 9 AWG | Transformer Core Coil
Intertechnik FE130/6.0/30 | 6.0 mH | 0.10 Ω | 5% | 9 AWG | Transformer Core Coil
Intertechnik FE130/300/20 | 30 mH | 0.47 Ω | 5% | 12 AWG | Transformer Core Coil
Intertechnik FE130/330/20 | 33 mH | 0.48 Ω | 5% | 12 AWG | Transformer Core Coil
Intertechnik TRI120/10.0/0.60 | 10 mH | 1.09 Ω | 1% | 23 AWG
Intertechnik Transformer Coil – 6.80 mH | FE130 | DCR 0.12 Ω | Cu 2.50 mm | ±5.0%
Intertechnik TRI120/12.0/0.60 | 12 mH | 1.21 Ω | 1% | 23 AWG
Intertechnik TRI120/15.0/0.60 | 15 mH | 1.35 Ω | 1% | 23 AWG
Intertechnik FE130/8.2/25 | 8.2 mH | 0.15 Ω | 5% | 10 AWG | Transformer Core Coil
Intertechnik FE130/100/25 | 10 mH | 0.17 Ω | 5% | 10 AWG | Transformer Core Coil
Intertechnik FE130/120/25 | 12 mH | 0.19 Ω | 5% | 10 AWG | Transformer Core Coil
Jantzen Audio 000-L-0049 | 0.49 mH | 0.226 Ω | 3% | 15 AWG | Litz Wax Coil
Jantzen Audio 001-0610 | 0.22 µF | 2% | 1200 V | Silver Z-Cap Capacitor
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























