Crossover Components
Jantzen Audio 000-1218 | 2.2 mH | 0.6 Ω | 3% | 17 AWG | Air Core Coil
Jantzen Audio 002-0125075 | 75 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 000-2509 | 4.6 mH | 0.53 Ω | 3% | 17 AWG | Iron Core Coil
Jantzen Audio 000-1256 | 1.15 mH | 0.32 Ω | 3% | 15 AWG | Air Core Coil
Jantzen Audio 000-0847 | 0.41 mH | 0.12 Ω | 3% | 13 AWG | Air Core Coil
Jantzen Audio 000-0243 | 1.1 mH | 0.32 Ω | 3% | 15 AWG | Air Core Coil
Jantzen Audio 002-0125051 | 51 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 002-0031 | 0.91 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 000-7627 | 0.14 mH | 0.11 Ω | 2% | 16 AWG | Cross Coil
Jantzen Audio 000-1698 | 11 mH | 4.45 Ω | 3% | 21 AWG | Air Core Coil
Jantzen Audio 000-2475 | 3.9 mH | 0.27 Ω | 3% | 15 AWG | Iron Core Coil
Jantzen Audio 000-1781 | 10 mH | 4.28 Ω | 3% | 21 AWG | Air Core Coil
Jantzen Audio 002-0025 | 0.75 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 002-0013 | 0.51 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 000-5361 | 28 mH | 1.73 Ω | 3% | 20 AWG | Iron Core Coil With Discs
Jantzen Audio 000-5529 | 2 mH | 0.11 Ω | 3% | 14 AWG | Iron Core Coil With Discs
Jantzen Audio 002-0008 | 0.36 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 000-85191 | 0.01 mH | 0.04 Ω | 2% | 16 AWG | Wax Coil
Jantzen Audio 000-8534 | 0.17 mH | 0.13 Ω | 2% | 16 AWG | Wax Coil
Jantzen Audio 001-0616 | 0.39 µF | 2% | 1200 V | Silver Z-Cap Capacitor
Jantzen Audio 002-0004 | 0.18 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 002-0003 | 0.15 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 000-L-0045 | 0.45 mH | 0.22 Ω | 3% | 15 AWG | Litz Wire Wax Coil
Jantzen Audio 000-5520 | 2.8 mH | 0.16 Ω | 3% | 15 AWG | Iron Core Coil With Discs
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.















