Crossover Components
Jantzen Audio 001-6198 | 820 µF | 5% | 100 V | EleCap Capacitor
Jantzen Audio 002-0002 | 0.12 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 002-0125100 | 100 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 000-5362 | 5.4 mH | 0.34 Ω | 3% | 17 AWG | Iron Core Coil With Discs
Jantzen Audio 000-7278 | 0.05 mH | 0.05 Ω | 2% | 14 AWG | Cross Coil
Jantzen Audio 000-0244 | 0.63 mH | 0.19 Ω | 3% | 14 AWG | Air Core Coil
Jantzen Audio 002-0125062 | 62 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 000-1216 | 2 mH | 0.58 Ω | 3% | 17 AWG | Air Core Coil
Jantzen Audio 000-8525 | 0.12 mH | 0.11 Ω | 2% | 16 AWG | Impregnated Copper Foil Coil
Jantzen Audio 000-85198 | 0.08 mH | 0.08 Ω | 2% | 16 AWG | Impregnated Copper Foil Coil
Jantzen Audio 000-0981 | 0.50 mH | 0.16 Ω | 3% | 14 AWG | Air-core Coil
Jantzen Audio 001-0622 | 0.56 µF | 2% | 800 V | Silver Z-Cap Capacitor
Jantzen Audio 000-1132 | 1.8 mH | 0.57 Ω | 3% | 17 AWG | Air-core Coil
Jantzen Audio 000-1657 | 0.90 mH | 0.29 Ω | 3% | 15 AWG | Air-core Coil
Jantzen Audio 000-5012 | 3.0 mH | 0.19 Ω | 3% | 15 AWG | H Iron-core Coil
Jantzen Audio 000-5228 | 3.9 mH | 0.19 Ω | 3% | 15 AWG | H Iron-core Coil
Jantzen Audio 000-1425 | 1.6 mH | 0.53 Ω | 3% | 17 AWG | Air-core Coil
Jantzen Audio 000-7628 | 0.14 mH | 0.12 Ω | 2% | 16 AWG | Copper Foil Coil
Jantzen Audio 000-7636 | 0.18 mH | 0.13 Ω | 2% | 16 AWG | Copper Foil Coil
Jantzen Audio 000-7639 | 0.195 mH | 0.13 Ω | 2% | 16 AWG | Copper Foil Coil
Jantzen Audio 000-7002 | 0.02 mH | 0.02 Ω | 2% | 12 AWG | Cross Coil
Jantzen Audio 000-2421 | 2.2 mH | 0.16 Ω | 3% | 14 AWG | Iron Core Coil
Jantzen Audio 000-5123 | 12 mH | 0.88 Ω | 3% | 18 AWG | Iron Core Coil With Discs
Jantzen Audio 000-5077 | 6.2 mH | 0.38 Ω | 3% | 17 AWG | Iron Core Coil With Discs
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.






















