Crossover Components
Jantzen Audio 000-5570 | 3.7 mH | 0.19 Ω | 3% | 15 AWG | Iron Core Coil With Discs
Jantzen Audio 000-5813 | 1.4 mH | 0.08 Ω | 3% | 13 AWG | Iron Core Coil With Discs
Jantzen Audio 002-0007 | 0.33 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 000-L.14-0022 | 0.22 mH | 0.1 Ω | 3% | 14 AWG | Litz Wire Wax Coil
Jantzen Audio 000-8003 | 0.03 mH | 0.03 Ω | 2% | 12 AWG | Wax Coil
Jantzen Audio 002-0005 | 0.22 Ω | 5 W | 1% | Superes Resistor
Jantzen Audio 000-8263 | 0.05 mH | 0.05 Ω | 2% | 14 AWG | Wax Coil
Jantzen Audio 000-826234 | 0.04 mH | 0.04 Ω | 2% | 14 AWG | Wax Coil
Jantzen Audio 000-8527 | 0.14 mH | 0.11 Ω | 2% | 16 AWG | Wax Coil
Jantzen Audio 000-5815 | 1.1 mH | 0.07 Ω | 3% | 13 AWG | Iron Core Coil With Discs
Jantzen Audio 000-5630 | 5.5 mH | 0.41 Ω | 3% | 17 AWG | Iron Core Coil With Discs
Jantzen Audio 000-1946 | 2.0 mH | 0.59 Ω | 3% | 17 AWG | Air-core Coil
Jantzen Audio 000-5556 | 37 mH | 2.22 Ω | 3% | 21 AWG | Iron Core Coil With Discs
Jantzen Audio 000-7640 | 0.20 mH | 0.14 Ω | 2% | 16 AWG | Copper Foil Coil
Jantzen Audio 000-2489 | 12 mH | 0.9 Ω | 3% | 18 AWG | Iron Core Coil
Jantzen Audio 000-0926 | 12 mH | 5.8 Ω | 3% | 22 AWG | Air Core Coil
Jantzen Audio 000-0964 | 12 mH | 4.82 Ω | 3% | 21 AWG | Air Core Coil
Jantzen Audio 000-1220 | 2.3 mH | 0.6 Ω | 3% | 17 AWG | Air Core Coil
Jantzen Audio 000-L-0039 | 0.39 mH | 0.20 Ω | 3% | 15 AWG | Litz Wax Coil
Jantzen Audio 000-1219 | 2.4 mH | 0.61 Ω | 3% | 17 AWG | Air Core Coil
Jantzen Audio 000-0886 | 1.3 mH | 0.34 Ω | 3% | 15 AWG | Air Core Coil
Jantzen Audio 000-7624 | 0.12 mH | 0.11 Ω | 2% | 16 AWG | Copper Foil Coil
Jantzen Audio 000-7631 | 0.16 mH | 0.12 Ω | 2% | 16 AWG | Cross Coil
Jantzen Audio 000-7622 | 0.11 mH | 0.10 Ω | 2% | 16 AWG | Copper Foil Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























