Crossover Components
Jantzen Audio 000-5064 | 6.3 mH | 0.33 Ω | 3% | 17 AWG | Iron Core Coil With Discs
Jantzen Audio 000-5523 | 6.5 mH | 0.34 Ω | 3% | 17 AWG | Iron Core Coil With Discs
Jantzen Audio 000-0270 | 4.6 mH | 1.33 Ω | 3% | 18 AWG | Air Core Coil
Jantzen Audio 000-826360 | 0.06 mH | 0.05 Ω | 2% | 14 AWG | Wax Coil
Jantzen Audio 000-0896 | 1.2 mH | 0.34 Ω | 3% | 15 AWG | Air Core Coil
Jantzen Audio 000-L-0042 | 0.42 mH | 0.22 Ω | 3% | 15 AWG | Litz Wire Wax Coil
Jantzen Audio 000-7629 | 0.15 mH | 0.12 Ω | 2% | 16 AWG | Cross Coil
Jantzen Audio 000-5401 | 5.5 mH | 0.35 Ω | 3% | 17 AWG | Iron Core Coil With Discs
Jantzen Audio 000-2360 | 5.4 mH | 0.6 Ω | 3% | 17 AWG | Iron Core Coil
Jantzen Audio 000-5649 | 22 mH | 1.35 Ω | 3% | 20 AWG | Iron Core Coil With Discs
Jantzen Audio 000-2465 | 4.1 mH | 0.29 Ω | 3% | 15 AWG | Iron Core Coil
Jantzen Audio 000-5557 | 39 mH | 2.3 Ω | 3% | 21 AWG | Iron Core Coil With Discs
Jantzen Audio 000-0986 | 0.39 mH | 0.11 Ω | 5% | 13 AWG | Air Core Coil
Jantzen Audio 000-5487 | 33 mH | 1.73 Ω | 3% | 20 AWG | Iron Core Coil With Discs
Jantzen Audio 000-0330 | 0.6 mH | 0.19 Ω | 3% | 14 AWG | Air Core Coil
Jantzen Audio 000-5637 | 5.5 mH | 0.32 Ω | 3% | 17 AWG | Iron Core Coil With Discs
Jantzen Audio 000-1215 | 1.9 mH | 0.54 Ω | 3% | 17 AWG | Air Core Coil
Jantzen Audio 000-5638 | 5.6 mH | 0.31 Ω | 3% | 17 AWG | Iron Core Coil With Discs
Jantzen Audio 000-0285 | 1.9 mH | 0.55 Ω | 3% | 17 AWG | Air Core Coil
Jantzen Audio 000-5134 | 7 mH | 0.41 Ω | 3% | 17 AWG | Iron Core Coil With Discs
Jantzen Audio 000-1222 | 3.8 mH | 1.2 Ω | 3% | 18 AWG | Air Core Coil
Jantzen Audio 000-5326 | 3.6 mH | 0.22 Ω | 3% | 15 AWG | Iron Core Coil With Discs
Jantzen Audio 000-0975 | 22 mH | 10.4 Ω | 3% | 24 AWG | Air Core Coil
Jantzen Audio 002-0019 | 0.62 Ω | 5 W | 1% | Superes Resistor
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























