Crossover Components
ClarityCap PUR1u0H250Vdc | 1.00 µF | 3% | 250 V
Jantzen Audio 001-0642 | 1.80 µF | 2% | 800 V | Silver Z-Cap Capacitor
Audio Note CAP-100-STDR-50U-350V | 50 µF | 20% | 350 V
Dayton Audio DPR10-0.33 | 0.33 Ω | 10 W | 1% | Precision Audio Resistor
Dayton Audio DPR10-0.51 | 0.51 Ω | 10 W | 1% | Precision Audio Resistor
Jantzen Audio 000-1939 | 2.7 mH | 0.90 Ω | 3% | 18 AWG | Air-core Coil
Mundorf MLGO+160-1000 | 1000 µF | 20% | 160 V
Dayton Audio DPR10-1.0 | 1.0 Ω | 10 W | 1% | Precision Audio Resistor
Mundorf BH100-2.2 Iron Core Coil, 2.2 mH | ±3%
Jantzen Audio 000-1857 | 0.75 mH | 0.26 Ω | 3% | 15 AWG | Air-core Coil
Mundorf MLGO63-8200 | 8200 µF | 20% | 63 V
Mundorf SUP8-2.20 | 2.20 µF | 2% | 600 V | Mcap SUPREME Classic Capacitor
Audio Note CAP-100-R-50U-100V | 50 µF | 20% | 100 V
Intertechnik M200/0680 | 6.80 Ω | 2 W | 1%
Intertechnik M200/0470 | 4.70 Ω | 2 W | 1%
Jantzen Audio 000-1706 | 6.8 mH | 2.33 Ω | 3% | 20 AWG | Air-core Coil
Mundorf MLGO100-1000 | 1000 µF | 20% | 100 V
Dayton Audio DPR10-12.5 | 12.5 Ω | 10 W | 1% | Precision Audio Resistor
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























