Crossover Components
Dayton Audio DPR10-1.5 | 1.5 Ω | 10 W | 1% | Precision Audio Resistor
Jantzen Audio 000-1248 | 10 mH | 3.7 Ω | 3% | 21 AWG | Air-core Coil
Dayton Audio DPR10-16 | 16 Ω | 10 W | 1% | Precision Audio Resistor
Dayton Audio DPR10-2.0 | 2.0 Ω | 10 W | 1% | Precision Audio Resistor
Jantzen Audio 000-1140 | 1.45 mH | 0.47 Ω | 3% | 17 AWG | Air-core Coil
Mundorf MCAP630-10 | 10 µF | 3% | 630 V | Mcap Classic Capacitor
Dayton Audio DPR10-2.4 | 2.4 Ω | 10 W | 1% | Precision Audio Resistor
Intertechnik MOX Resistor – 56 Ω | 4 W | ±5%
Dayton Audio DPR10-25 | 25 Ω | 10 W | 1% | Precision Audio Resistor
Jantzen Audio 000-1070 | 3.3 mH | 1.04 Ω | 3% | 18 AWG | Air-core Coil
Jantzen Audio 000-1068 | 3.0 mH | 0.99 Ω | 3% | 18 AWG | Air-core Coil
Audyn KPQS/22/400 | 22 µF | 5% | 400 V | QS4 Capacitor
Dayton Audio PMPC-12 | 12 µF | 1% | 250 V | Preciziós Audio Capacitor
Dayton Audio DPR10-3.0 | 3.0 Ω | 10 W | 1% | Precision Audio Resistor
Audyn KPQS/10/400 | 10 µF | 5% | 400 V | QS4 Capacitor
Dayton Audio DPR10-3.3 | 3.3 Ω | 10 W | 1% | Precision Audio Resistor
Dayton Audio DPR10-3.7 | 3.7 Ω | 10 W | 1% | Precision Audio Resistor
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























