Crossover Components
Jantzen Audio 000-0011 | 0.56 mH | 0.18 Ω | 3% | 14 AWG | Air-core Coil
Dayton Audio DPR10-6.5 | 6.5 Ω | 10 W | 1% | Precision Audio Resistor
Intertechnik MOX04/5.6 | 5.60 Ω | 4 W | 2%
Dayton Audio DPR10-7.0 | 7.0 Ω | 10 W | 1% | Precision Audio Resistor
Intertechnik MOX04/4.7 | 4.70 Ω | 4 W | 2%
Intertechnik ELCA/47/AX | 47 µF | 10% | 100 V
Audio Note CAP-100-STDR-220U-350V | 220 µF | 20% | 350 V
Intertechnik MOX04/3.9 | 3.90 Ω | 4 W | 2%
Dayton Audio DPR10-8.0 | 8.0 Ω | 10 W | 1% | Precision Audio Resistor
Intertechnik MOX04/3.3 | 3.30 Ω | 4 W | 2%
Jantzen Audio 000-1096 | 1.0 mH | 0.285 Ω | 3% | 15 AWG | Air-core Coil
Audio Note CAP-100-STDR-100U-500V | 100 µF | 20% | 500 V
Audio Note CAP-5050 | 0.047 µF | 10% | 630 V
Dayton Audio DPR10-9.1 | 9.1 Ω | 10 W | 1% | Precision Audio Resistor
Intertechnik MOX04/2.7 | 2.70 Ω | 4 W | 2%
Intertechnik MOX04/2.2 | 2.20 Ω | 4 W | 2%
Jantzen Audio 000-1930 | 3.9 mH | 1.20 Ω | 3% | 18 AWG | Air-core Coil
Audio Note CAP-100-STDR-220U-160V | 220 µF | 20% | 160 V
Audio Note CAP-5070 | 0.068 µF | 10% | 630 V
Audio Note CAP-100-STDR-10000U-16V | 10000 µF | 20% | 16 V
Intertechnik MOX04/1.8 | 1.80 Ω | 4 W | 2%
Monacor LSR-180/20 | 18 Ω | 20 W | 5% | High-power Ceramic Resistor
Intertechnik MOX04/1.5 | 1.50 Ω | 4 W | 2%
Jantzen Audio 000-1956 | 4.0 mH | 1.21 Ω | 3% | 18 AWG | Air-core Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























