Crossover Components
Audio Note CAP-100-R-220U-100V | 220 µF | 20% | 100 V
Dayton Audio DPR10-4.0 | 4.0 Ω | 10 W | 1% | Precision Audio Resistor
Dayton Audio DPR10-4.3 | 4.3 Ω | 10 W | 1% | Precision Audio Resistor
Jantzen Audio 000-0107 | 0.27 mH | 0.095 Ω | 3% | 13 AWG | Air-core Coil
Intertechnik HQ43/10/085 | 10 mH | 0.93 Ω | 5% | 20 AWG
Jantzen Audio 001-6195 | 560 µF | 5% | 100 V | EleCap Capacitor
Audio Note CAP-5020 | 0.022 µF | 10% | 630 V
Audio Note CAP-5030 | 0.033 µF | 10% | 630 V
Dayton Audio DPR10-4.7 | 4.7 Ω | 10 W | 1% | Precision Audio Resistor
Dayton Audio DPR10-5.1 | 5.1 Ω | 10 W | 1% | Precision Audio Resistor
Intertechnik HQ43/3.3/095 | 3.3 mH | 0.37 Ω | 5% | 19 AWG
Intertechnik HQ43/3.0/095 | 3.0 mH | 0.36 Ω | 5% | 19 AWG
Audio Note CAP-5040 | 0.039 µF | 10% | 630 V
Dayton Audio DPR10-5.6 | 5.6 Ω | 10 W | 1% | Precision Audio Resistor
Intertechnik MOX04/8.2 | 8.20 Ω | 4 W | 2%
Dayton Audio DPR10-6.0 | 6.0 Ω | 10 W | 1% | Precision Audio Resistor
Intertechnik MOX04/6.8 | 6.80 Ω | 4 W | 2%
Dayton Audio LW14-30 | 0.30 mH | 0.13 Ω | 3% | 14 AWG | Air-core Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























