Crossover Components
Jantzen Audio 002-0172 | 2.0 Ω | 10 W | 1% | Superes Resistor
Mundorf MCAP400-2.70 | 2.70 µF | 3% | 400 V | Mcap Classic Capacitor
Mundorf MLSL500-200+200 | 200 + 200 µF | 20% | 500 V
Jantzen Audio 002-0178 | 2.4 Ω | 10 W | 1% | Superes Resistor
Mundorf L100-2.70 | 2.70 mH | 0.90 Ω | 2% | 18 AWG | Air-core Coil
Jantzen Audio 001-6183 | 270 µF | 5% | 100 V | EleCap Capacitor
Jantzen Audio 002-0181 | 2.70 Ω | 10 W | 1% | Superes Resistor
Intertechnik WAX5/8.20/5 | 8.20 Ω | 5 W | 5%
Jantzen Audio 002-0184 | 3.0 Ω | 10 W | 1% | Superes Resistor
Intertechnik WAX5/6.80/5 | 6.80 Ω | 5 W | 5%
Jantzen Audio 002-0187 | 3.30 Ω | 10 W | 1% | Superes Resistor
Intertechnik WAX5/5.60/5 | 5.60 Ω | 5 W | 5%
Jantzen Audio 002-0190 | 3.6 Ω | 10 W | 1% | Superes Resistor
Dayton Audio DMPC-25 | 25 µF | 5% | 250 V | Polypropylene Capacitor
Jantzen Audio 002-0196 | 4.3 Ω | 10 W | 1% | Superes Resistor
Intertechnik WAX5/3.90/5 | 3.90 Ω | 5 W | 5%
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























