Crossover Components
Jantzen Audio 002-0148 | 0.91 Ω | 10 W | 1% | Superes Resistor
Mundorf MCAP400-3.90 | 3.90 µF | 3% | 400 V | Mcap Classic Capacitor
Jantzen Audio 002-0154 | 1.1 Ω | 10 W | 1% | Superes Resistor
Jantzen Audio 000-2068 | 2.0 mH | 0.185 Ω | 3% | 15 AWG | I Iron-core Coil
Intertechnik MKTR/10/100 | 10 µF | 5% | 100 V
Mundorf MEO-18T3.450 | 18 µF | 3% | 450 V | Oil
Jantzen Audio 002-0157 | 1.2 Ω | 10 W | 1% | Superes Resistor
Intertechnik WAX5/39.0/5 | 39 Ω | 5 W | 5%
Jantzen Audio 002-0160 | 1.3 Ω | 10 W | 1% | Superes Resistor
Jantzen Audio 000-1982 | 5.0 mH | 2.0 Ω | 3% | 20 AWG | Air-core Coil
Audio Note CAP-100-R-220U-16V | 220 µF | 20% | 16 V
Jantzen Audio 002-0166 | 1.6 Ω | 10 W | 1% | Superes Resistor
Intertechnik WAX5/22.0/5 | 22 Ω | 5 W | 5%
Jantzen Audio 000-0195 | 0.51 mH | 0.204 Ω | 3% | 15 AWG | Air-core Coil
Intertechnik HQ40/1.5/095 | 1.5 mH | 0.22 Ω | 5% | 19 AWG
Mundorf MCAP630-1.50 | 1.50 µF | 3% | 630 V | Mcap Classic Capacitor
Mundorf MLGO40-22000 | 22000 µF | 20% | 40 V
Mundorf MLGO+80-10000 | 10000 µF | 20% | 80 V
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























