Crossover Components
Jantzen Audio 000-0044 | 0.80 mH | 0.209 Ω | 3% | 14 AWG | Air-core Coil
Dayton Audio DPR20-0.82 | 0.82 Ω | 20 W | 1% | Precision Audio Resistor
Jantzen Audio 000-1673 | 2.5 mH | 0.67 Ω | 3% | 17 AWG | Air-core Coil
Audyn ERA/82/100/1 | 82 µF | 10% | 100 V | Bipolar Electrolytic Capacitor
Dayton Audio DPR20-1.0 | 1.0 Ω | 20 W | 1% | Precision Audio Resistor
Dayton Audio DPR20-1.2 | 1.2 Ω | 20 W | 1% | Precision Audio Resistor
Dayton Audio DPR20-12.5 | 12.5 Ω | 20 W | 1% | Precision Audio Resistor
ClarityCap MR | 4.10 µF | 3% | 400 V
Dayton Audio DPR20-16 | 16 Ω | 20 W | 1% | Precision Audio Resistor
Jantzen Audio 000-7669 | 0.31 mH | 0.18 Ω | 2% | 16 AWG | Copper Foil Coil
ClarityCap MR | 4.70 µF | 3% | 400 V
Audyn MKTA/6.8/250 | 6.8 µF | 5% | 250 V | MKT-A Capacitor
Dayton Audio DPR20-2.0 | 2.0 Ω | 20 W | 1% | Precision Audio Resistor
Dayton Audio DPR20-2.4 | 2.4 Ω | 20 W | 1% | Precision Audio Resistor
Audyn KPQS/4.7/400 | 4.7 µF | 5% | 400 V | QS4 Capacitor
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























