Crossover Components
Audio Note CAP-100-STDR-100U-100V | 100 µF | 20% | 100 V
Audio Note RES-NM35-1W-6K8 | 6.8 kΩ | 1 W | 1%
Jantzen Audio 002-0718 | 0.68 Ω | 10 W | 5% | Ceramic Resistor
Audio Note RES-NM35-1W-8K2 | 8.2 kΩ | 1 W | 1%
Jantzen Audio 002-0715 | 0.62 Ω | 10 W | 5% | Ceramic Resistor
Jantzen Audio 000-2412 | 1.9 mH | 0.181 Ω | 3% | 15 AWG | I Iron-core Coil
Mundorf L100-3.30 | 3.30 mH | 1.00 Ω | 2% | 18 AWG | Air-core Coil
Audio Note CAP-100-STDR-220U-63V | 220 µF | 20% | 63 V
001-7037 | 3.90 µF | 3% | 100 V | Alumen Z-Cap
Audio Note RES-NM35-1W-10K | 10 kΩ | 1 W | 1%
Audio Note RES-NM35-1W-12K | 12 kΩ | 1 W | 1%
Jantzen Audio 000-1895 | 0.39 mH | 0.17 Ω | 3% | 15 AWG | Air-core Coil
Audio Note RES-NM35-1W-15K | 15 kΩ | 1 W | 1%
Audio Note RES-NM35-1W-18K | 18 kΩ | 1 W | 1%
Jantzen Audio 000-1518 | 0.47 mH | 0.20 Ω | 3% | 15 AWG | Air-core Coil
Jantzen Audio 000-1479 | 0.52 mH | 0.21 Ω | 3% | 15 AWG | Air-core Coil
Audyn KPSN/1.0/630 | 1.0 µF | 5% | 630 V | Tin Foil Capacitor
Dayton Audio DMPC-12 | 12 µF | 5% | 250 V | Polypropylene Capacitor
Audio Note RES-NM35-1W-22K | 22 kΩ | 1 W | 1%
Audio Note RES-NM35-1W-27K | 27 kΩ | 1 W | 1%
Jantzen Audio 002-0667 | 56 Ω | 5 W | 5% | Ceramic Resistor
Jantzen Audio 000-1131 | 1.8 mH | 0.74 Ω | 3% | 18 AWG | Air-core Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























