Crossover Components
Audio Note RES-NM35-1W-1K5 | 1.5 kΩ | 1 W | 1%
Audio Note RES-NM35-1W-1K8 | 1.8 kΩ | 1 W | 1%
Jantzen Audio 002-0739 | 1.3 Ω | 10 W | 5% | Ceramic Resistor
Jantzen Audio 000-5433 | 0.82 mH | 0.068 Ω | 3% | 14 AWG | H Iron-core Coil
Jantzen Audio 000-1298 | 2.55 mH | 0.68 Ω | 3% | 17 AWG | Air-core Coil
Jantzen Audio 000-5150 | 12 mH | 0.54 Ω | 3% | 17 AWG | H Iron-core Coil
Audyn KPQS/1.5/400 | 1.5 µF | 5% | 400 V | QS4 Capacitor
Audio Note RES-NM35-1W-2K2 | 2.2 kΩ | 1 W | 1%
Jantzen Audio 002-0736 | 1.2 Ω | 10 W | 5% | Ceramic Resistor
Audio Note RES-NM35-1W-2K7 | 2.7 kΩ | 1 W | 1%
Jantzen Audio 002-0730 | 1.0 Ω | 10 W | 5% | Ceramic Resistor
Jantzen Audio 000-5250 | 5.6 mH | 0.40 Ω | 3% | 18 AWG | H Iron-core Coil
Jantzen Audio 001-7035 | 3.30 µF | 3% | 100 V | Alumen Z-Cap Capacitor
Mundorf SUP8-10 | 10 µF | 2% | 600 V | Mcap SUPREME Classic Capacitor
Audio Note CAP-100-R-5U-16V | 5.0 µF | 20% | 16 V
Audio Note RES-NM35-1W-3K3 | 3.3 kΩ | 1 W | 1%
Audio Note RES-NM35-1W-4K7 | 4.7 kΩ | 1 W | 1%
Jantzen Audio 002-0724 | 0.82 Ω | 10 W | 5% | Ceramic Resistor
Jantzen Audio 000-5379 | 7.0 mH | 0.30 Ω | 3% | 15 AWG | H Iron-core Coil
Jantzen Audio 000-5223 | 25 mH | 1.92 Ω | 3% | 21 AWG | H Iron-core Coil
Audyn KPSN/082/630 | 0.82 µF | 5% | 630 V
Audio Note CAP-100-STDR-5U-350V | 5.0 µF | 20% | 350 V
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























