Crossover Components
Jantzen Audio 002-0346 | 15 Ω | 5 W | 5% | MOX Resistor
Jantzen Audio 002-0343 | 12 Ω | 5 W | 5% | MOX Resistor
Jantzen Audio 002-0340 | 10 Ω | 5 W | 5% | MOX Resistor
Jantzen Audio 000-L-0027 | 0.27 mH | 0.16 Ω | 3% | 15 AWG | Litz Wax Coil
ClarityCap PUR15uH250Vdc | 15 µF | 3% | 250 V
Jantzen Audio 002-0334 | 8.2 Ω | 5 W | 5% | MOX Resistor
Mundorf ME-47T3.350 | 47 µF | 3% | 350 V | MCap EVO Capacitor
Audyn KPQS/010/630 | 0.10 µF | 5% | 630 V | QS6 Capacitor
Mundorf MEO-47T3.350 | 47 µF | 3% | 350 V | Oil
Jantzen Audio 002-0328 | 6.8 Ω | 5 W | 5% | MOX Resistor
Intertechnik CO30/056/080 | 0.56 mH | 0.30 Ω | 5% | 20 AWG
Audyn ERA/27/100/1 | 27 µF | 10% | 100 V | Bipolar Electrolytic Capacitor
Mundorf MLGO40-33000 | 33000 µF | 20% | 40 V
Audio Note CAP-100-R-10000U-25V | 10000 µF | 20% | 25 V
Jantzen Audio 002-0325 | 6.2 Ω | 5 W | 5% | MOX Resistor
Jantzen Audio 002-0322 | 5.6 Ω | 5 W | 5% | MOX Resistor
Intertechnik CO30/068/071 | 0.68 mH | 0.40 Ω | 5% | 21 AWG
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























