Crossover Components
Mundorf L100-3.90 | 3.90 mH | 1.13 Ω | 2% | 18 AWG | Air-core Coil
HQP43/1.0/95 | 1.0 mH | 0.25 Ω | 5% | 19 AWG | Mushroom Core Coil
Mundorf P100-4.7 | 4.7 mH | 0.80 Ω | 3% | 18 AWG | Iron-core Coil
Intertechnik LU44/027/100 | 0.27 mH | 0.27 Ω | 3% | 18 AWG
000-8580 | 0.470 mH | 0.24 Ω | 2% | 16 AWG | Wax Coil
Audyn KPQS/82/400 | 82 µF | 5% | 400 V | QS4 Capacitor
Mundorf BL100-0.47 Air Core Coil, 0.47 mH | DCR 0.32 Ω | ±2%
ClarityCap CMR | 8.20 µF | 3% | 400 V
ClarityCap PUR22uH250Vdc | 22 µF | 3% | 250 V
Audyn MKTA/5.6/250 | 5.6 µF | 5% | 250 V | MKT-A Capacitor
Audyn MKTA/5.6/160 | 5.6 µF | 5% | 160 V | MKT-A Capacitor
Audyn MKTA/4.7/250 | 4.7 µF | 5% | 250 V | MKT-A Capacitor
Mundorf MLGO25-47000 | 47000 µF | 20% | 25 V
Mundorf H50-5.6 Iron Core Coil, 5.6 mH | DCR 1.14 Ω | ±3%
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























