Crossover Components
Audio Note CAP-3170 | 0.01 µF | 10% | 630 V
Audyn KPQS/047/400 | 0.47 µF | 5% | 400 V
Audio Note CAP-3180 | 0.015 µF | 10% | 630 V
Audio Note CAP-3185 | 0.018 µF | 10% | 630 V
Jantzen Audio 002-0253 | 0.39 Ω | 5 W | 5% | MOX Resistor
Intertechnik MEF3/033 | 0.33 Ω | 3 W | 1%
Intertechnik LU55/1.8/100 | 1.8 mH | 0.79 Ω | 3% | 18 AWG
Intertechnik CO30/082/071 | 0.82 mH | 0.45 Ω | 5% | 21 AWG
Audyn KPQS/022/400 | 0.22 µF | 5% | 400 V
Audio Note CAP-3190 | 0.022 µF | 10% | 630 V
Audio Note CAP-3200 | 0.033 µF | 10% | 630 V
Jantzen Audio 002-0244 | 0.22 Ω | 5 W | 5% | MOX Resistor
Dayton Audio LW185 | 5.0 mH | 1.33 Ω | 3% | 18 AWG | Air-core Coil
Audio Note CAP-100-STDR-100U-63V | 100 µF | 20% | 63 V
Audio Note CAP-3210 | 0.039 µF | 10% | 630 V
Audio Note CAP-100-STDR-220U-16V | 220 µF | 20% | 16 V
Audio Note CAP-3220 | 0.047 µF | 10% | 630 V
Mundorf CFC16-0.39 | 0.39 mH | 0.20 Ω | 2% | 16.5 AWG | Foil Coil
Audio Note CAP-3230 | 0.068 µF | 10% | 630 V
ClarityCap CMR | 6.80 µF | 3% | 400 V
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























