Resistors
SETA RWS 864 / RWS 1064 - 10000 Resistor, 25 W | 10000 Ω
Monacor LSR-18/20 | 1.8 Ω | 20 W | 5% | High-power Ceramic Resistor
SETA RWS 864 / RWS 1064 - 330 Resistor, 25 W | 330 Ω
SETA RWS 864 / RWS 1064 - 33 Resistor, 25 W | 3.3 Ω
SETA RWS 864 / RWS 1064 - 1.2 Resistor, 25 W | 1.2 Ω
SETA RWS 864 / RWS 1064 - 5.6 Resistor, 25 W | 5.6 Ω
SETA RWS 864 / RWS 1064 - 5600 Resistor, 25 W | 5600 Ω
SETA RWS 845 / RB 58 / RW 68 - 5600 Resistor, 16 W | 5600 Ω
SETA RWS 845 / RB 58 / RW 68 - 6800 Resistor, 16 W | 6800 Ω
SETA RWS 864 / RWS 1064 - 1800 Resistor, 25 W | 1800 Ω
Mundorf MR5-0.22 | 0.22 Ω | 5 W | 2% | Mresist MOX Metal-oxide Resistor
Read more: Resistors
Driver sensitivities rarely match: a tweeter is often 3–6 dB louder than the mid-woofer it is paired with. An L-pad built from resistors attenuates that difference, while a Zobel network uses them to compensate for the rising impedance of a voice coil.
Wirewound resistors are affordable and robust but carry a little inductance; metal film and graphite types are non-inductive and therefore preferred in the treble path. Size the power rating generously: resistors below 10 W rarely belong in a passive crossover.























