Iron core coils
P62/3.00/140 | 3.0 mH | 0.24 Ω | 5% | 15 AWG | Choke Coil
HQP56/8.2/95 | 8.2 mH | 0.85 Ω | 5% | 19 AWG | Mushroom Core Coil
HQP56/2.2/32 | 2.2 mH | 0.23 Ω | 5% | 16 AWG | Mushroom Core Coil
Intertechnik Equalizing Power Coil – 8.60 mH | CO62 | 0.60 mm Copper | ±5.0%
HQP56/3.9/12 | 3.9 mH | 0.42 Ω | 5% | 17 AWG | Mushroom Core Coil
P62/3.30/140 | 3.3 mH | 0.26 Ω | 5% | 15 AWG | Choke Coil
HQP56/12.0/85 | 12 mH | 1.2 Ω | 5% | 20 AWG | Mushroom Core Coil
HQP56/3.0/18 | 3.0 mH | 0.33 Ω | 5% | 17 AWG | Mushroom Core Coil
HQP56/6.8/95 | 6.8 mH | 0.74 Ω | 5% | 19 AWG | Mushroom Core Coil
HQP56/2.7/18 | 2.7 mH | 0.31 Ω | 5% | 17 AWG | Mushroom Core Coil
Intertechnik CO30/047/090 | 0.47 mH | 0.23 Ω | 5% | 19 AWG
HQP56/5.6/95 | 5.6 mH | 0.65 Ω | 5% | 19 AWG | Mushroom Core Coil
Intertechnik CO55/180/060 | 18 mH | 3.74 Ω | 5% | 23 AWG
P62/3.90/140 | 3.9 mH | 0.28 Ω | 5% | 15 AWG | Choke Coil
Intertechnik HQ58/2.2/160 | 2.2 mH | 0.10 Ω | 5% | 14 AWG
P62/18.00/095 | 18 mH | 1.34 Ω | 5% | 19 AWG | Choke Coil
Intertechnik DR56/1.0/140 | 1.0 mH | 0.10 Ω | 5% | 15 AWG
Intertechnik DR56/1.2/140 | 1.2 mH | 0.12 Ω | 5% | 15 AWG
Intertechnik DR56/150/085 | 15 mH | 0.95 Ω | 5% | 20 AWG
Intertechnik HQ58/4.7/140 | 4.7 mH | 0.19 Ω | 5% | 15 AWG
Intertechnik CO30/022/090 | 0.22 mH | 0.15 Ω | 5% | 19 AWG
P62/10.0/112 | 10 mH | 0.73 Ω | 5% | 17 AWG | Choke Coil
Intertechnik CO30/018/090 | 0.18 mH | 0.13 Ω | 5% | 19 AWG
Intertechnik DR56/2.7/140 | 2.7 mH | 0.18 Ω | 5% | 15 AWG
Read more: Iron core coils
In an iron core inductor, a ferromagnetic core concentrates the magnetic field, so the same inductance needs far less wire, a smaller size and lower DCR. For high-value bass-section coils this is often the most practical solution.
The trade-off is that the core can saturate at high current, which causes distortion. For high-power systems choose a generously sized core, and where space allows, an air core remains the cleaner choice.























